David Jacobs Posted January 20, 2014 Share Posted January 20, 2014 I am just building an Irvine Tutor which takes Standard Servos. I was going to buy Corona metal gear servos from HK but the STandard Corona servo is only 32mm long not standard!! I'm therefore a bit lost as I dont want to pay more the a tenner each and have used Corona successfully in the past. I was therefore thinking of keeping it simple and going for Futaba S3003 but it struck me that the fitting may not be compatible with my Orange recievers. Any advice on either point appreciated. Quote Link to comment Share on other sites More sharing options...
iqon Posted January 20, 2014 Share Posted January 20, 2014 They will be compatible Quote Link to comment Share on other sites More sharing options...
simon barr Posted January 20, 2014 Share Posted January 20, 2014 Yep, the plugs will fit... And the S3003's will be fine too.... Quote Link to comment Share on other sites More sharing options...
David Jacobs Posted January 20, 2014 Author Share Posted January 20, 2014 Many thanks that's very helpful. Quote Link to comment Share on other sites More sharing options...
crispin church Posted January 21, 2014 Share Posted January 21, 2014 on the servo plug there a tab on signal end if in way just trim it flat Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.