Alan Cardwell 1 Posted January 21, 2014 Share Posted January 21, 2014 I'm trying to fit retracts to my Parkzone Thunderbolt but am having trouble on two fronts, "a" there are blanks on the trunnion block where you get to the allen screw for the legs, how do you remove it, and "b" the four fixing screw holes on the retracts only two (the outer ones) line up and the retracts won't sit down flat on the wing insert. Do you have to grind the corner of the mount in the wing. I have the correct set EFLG120. Cheers Alan Quote Link to comment Share on other sites More sharing options...
IanR Posted January 21, 2014 Share Posted January 21, 2014 Alan, does this help **LINK** Ian Quote Link to comment Share on other sites More sharing options...
Alan Cardwell 1 Posted January 21, 2014 Author Share Posted January 21, 2014 Thanks for your response Ian, have been through all tinternet videos etc but there's nowt about my probs. I hope summat chucks up, I'm a bit miffed at these problems as I'm a loyal parkzone user Alan Quote Link to comment Share on other sites More sharing options...
Allan Bowker Posted January 22, 2014 Share Posted January 22, 2014 If your LMS can't help Alan, I would try calling Horizon Hobby. They are usually very good when I call. Quote Link to comment Share on other sites More sharing options...
Alan Cardwell 1 Posted January 23, 2014 Author Share Posted January 23, 2014 Thanks again for your replies, problem solved my LMS sold me the wrong retracts so they have ordered the correct ones eflg100. Alan Quote Link to comment Share on other sites More sharing options...
Allan Bowker Posted January 24, 2014 Share Posted January 24, 2014 Good to know that Alan, thanks for the update. Glad that the LMS looked after you well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.