Nigel R Posted November 12, 2018 Share Posted November 12, 2018 "Hitec hs 75bb speed 4.8/6v 0.45/0.34sec @180 degree" HS75 cannot be used for anything but retracts (unless you enjoy a two position elevator!) as it goes from end to end with no in between stops. The 77 is a more normal sort of servo. Quote Link to comment Share on other sites More sharing options...
Giuseppe Saroli Posted November 12, 2018 Author Share Posted November 12, 2018 Thanks Nigel Quote Link to comment Share on other sites More sharing options...
Andy J Posted March 12, 2019 Share Posted March 12, 2019 Have drawn an A0 plan for a 1/4 scale Bobber using power point if anyone wants it. Cant guarantee its accuracy though as nothing really to reference it against other than the pictures on the Zlin site. Metal construction underway using 7mm stainless steel . Quote Link to comment Share on other sites More sharing options...
CHristopher Drews Posted January 15, 2020 Share Posted January 15, 2020 As beautiful as this bird is, why on God's green earth is it so difficult to find one!? Can anyone point me in the right direction? I would love plans or links. Thank you in advance. Quote Link to comment Share on other sites More sharing options...
Martian Posted January 16, 2020 Share Posted January 16, 2020 Fancy 3d printing one including wheels and tyres Quote Link to comment Share on other sites More sharing options...
Andy J Posted January 16, 2020 Share Posted January 16, 2020 I had to draw my own by tracing over suitable pictures. Purchased a lot of tube at a significant cost and made a start on cutting to form one side of the fuselage, but in my normal way, then lost interest in the build! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.