Martyn Perks Posted April 16, 2015 Share Posted April 16, 2015 Hi all , am just about to order a Futaba 10J Tx but cannot find out if it is supplied as Mode 1 or 2 and if it changeable? I have done all my Futaba transmitters no problem in the past but a google search talks about swapping the spring for the ratchet and a recalibration. Anyone shed any light on this? Thanks Quote Link to comment Share on other sites More sharing options...
cymaz Posted April 16, 2015 Share Posted April 16, 2015 Page 174 of the manual ......that should see you right Quote Link to comment Share on other sites More sharing options...
Martyn Perks Posted April 17, 2015 Author Share Posted April 17, 2015 Thanks Quote Link to comment Share on other sites More sharing options...
gangster Posted April 17, 2015 Share Posted April 17, 2015 I have not done a 10 j but the 8 was easy enough and no change of calibration/ centring was required. If you have done mode changes before on other kits you can ignore the bit in the manual about needing it to be done at a service centre. It's the easiest mechanical mode change I have ever done. Lovely transmitter to use but disappointingly cheap plastic feel Quote Link to comment Share on other sites More sharing options...
Martyn Perks Posted April 18, 2015 Author Share Posted April 18, 2015 TBH they all feel cheap and plasticky these days i think. My Zap weighs a ton and is beautifully built but it's worn out now and it won't balance properly with a 2.4g module and neck strap. I'm not expecting any TX to match it in that repect. Fortunately Slough Models phoned and asked if I wanted Mode 1 or 2 as they had both in stock! Quote Link to comment Share on other sites More sharing options...
Former Member Posted April 18, 2015 Share Posted April 18, 2015 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.