stevejet66 Posted June 28, 2015 Share Posted June 28, 2015 This is my own design high wing jet trainer, Home engineered KJ66 gas turbine, The only parts i brought were the compressor wheel, Turbine wheel and n.g.v, No fadec or any other type of ecu, Its all programmed using the throttle curve on the transmitter, Its set to give 12lb's of thrust and can be adjusted to give more or less, It as three safety shut down features,This is stage 5 of engine testing and is now ready for its maiden flight, https://www.youtube.com/watch?v=NOCKS1Q064w Edited By stevejet66 on 28/06/2015 08:13:11 Quote Link to comment Share on other sites More sharing options...
simon burch Posted June 28, 2015 Share Posted June 28, 2015 Amazing work. Seems to throttle really well the way you have it set up. Look forward to seeing her fly. Simon Quote Link to comment Share on other sites More sharing options...
stevejet66 Posted June 29, 2015 Author Share Posted June 29, 2015 Thanks simon, Ive really enjoyed the whole project, Very interesting, I will upload some video of it flying as soon as it happens, Cheers steve, Quote Link to comment Share on other sites More sharing options...
dave windymiller Posted November 17, 2016 Share Posted November 17, 2016 Seeeing your own engine in the sky for the first time is a thrill thats up there with all of your past modelling highlights. A mix of elation and fear (will it blow up; flame out etc etc). The very best of luck Heres my moment https://www.youtube.com/watch?v=gIx0ycw-mEo Edited By dave windymiller on 17/11/2016 19:43:20 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.