r6dan Posted September 3, 2018 Share Posted September 3, 2018 I have a wildthing and just cant seem to get it flying just so... built exactly as insyructions state COG spot on but things just arent quite perfect, in light winds it seems like it wants to stall no matter where the cog is or where my control surfaces are adjusted to, in heavy winds its sluggish, even ballested its slow, when inverted it just wants to stall, and sometines depending on the wind it "hyper stalls"... and ideas ive been flying a weasel lots too and that just seems a million miles away in performance but the wildthing bounces in heavy wind on bad landings so i like to fly it in those conditions. Quote Link to comment Share on other sites More sharing options...
bert baker Posted September 3, 2018 Share Posted September 3, 2018 Have built two of them,,, both were done as per plan,,, both had a 4 cell AA 4.8 volt nicad pack,,. Neither needed any lead up front,,, I did put some in for test flight of first one but ended up with it removed and went well.. Perhaps you need more wind up the slope Edited By bert baker on 03/09/2018 19:04:12 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.