Clive Jones 4 Posted July 20, 2019 Share Posted July 20, 2019 I have two telemetry Rxs Motive 8 Channel And DIY 8 channel Both are "2 way" bought from Bangood. Can I link an FrSky Vario to either and what pins should be used? Thanks, Clive. Quote Link to comment Share on other sites More sharing options...
Bob Cotsford Posted July 20, 2019 Share Posted July 20, 2019 If they are both D8 compatible then this RCGroup thread might help. Quote Link to comment Share on other sites More sharing options...
Clive Jones 4 Posted July 20, 2019 Author Share Posted July 20, 2019 Thanks Bob, I will take a look. Quote Link to comment Share on other sites More sharing options...
Clive Jones 4 Posted July 22, 2019 Author Share Posted July 22, 2019 All done and working. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
Bob Cotsford Posted July 22, 2019 Share Posted July 22, 2019 Glad to be of help. Quote Link to comment Share on other sites More sharing options...
Clive Jones 4 Posted July 22, 2019 Author Share Posted July 22, 2019 On my Motive 8 channel Rx, Yellow wire to RX, Brown wire to A2. "normal" servo plug on to a spare servo socket on Rx to power the vario. https://www.banggood.com/MOTIVE-RC-R8SB-2-4G-9CH-Frsky-D8-Compatible-Telemetry-Receiver-for-X9D-Plus-DJI-XJT-Transmitter-p-1344163.html?rmmds=search Then set up FrSky Tx for vario - many YouTube videos for that. https://www.youtube.com/watch?v=tgvnFrSuKg8 If I could decipher how to post photos on here, I would... Clive Quote Link to comment Share on other sites More sharing options...
Clive Jones 4 Posted July 22, 2019 Author Share Posted July 22, 2019 Figured it out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.