Bill Reed Posted August 11, 2019 Share Posted August 11, 2019 I need to charge this eflight 2s pack,the eflight 2s charger does not work and was always very slow and problematic, I have a Cellpro charger which is great for me ,plug in a pack and it charges auto. But I can not get a balance board to suit the eflight pack. I the picture you can see a balance board, on the KO side ,the 2s socket, I have a plug for that and a socket for the lipo SO I can make a adapter/lead as such. but I am not sure if this will work ? If I make sure the lipo red wire ,will be on the right on board, black lipo wire on the left on board and white lipo wire in middle of board, will this work and be safe thanks Quote Link to comment Share on other sites More sharing options...
Bill Reed Posted August 11, 2019 Author Share Posted August 11, 2019 Forgot to post pictures! Quote Link to comment Share on other sites More sharing options...
Shaun Walsh Posted August 11, 2019 Share Posted August 11, 2019 Think that you need one of these https://hobbyking.com/en_us/6-x-parallel-jst-ph-charge-lead-for-e-flite-umx-series-2s-lipoly.html?countrycode=GB&gclsrc=aw.ds&gclid=Cj0KCQjw-b7qBRDPARIsADVbUbWfINfJ_Vdo3LA6QkejgQXglyGfR7-wjKDn1kSJPSCHhVUeg49kX8gaAmo2EALw_wcB&___store=en_us Quote Link to comment Share on other sites More sharing options...
Bill Reed Posted August 11, 2019 Author Share Posted August 11, 2019 I could make the adapter in minutes if I new using that KO socket was compatible? Plus I only need 1 lipo to charge Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.