Brian Dorricott 1 Posted January 16, 2020 Share Posted January 16, 2020 I have a AR636a rescued from a burnt out Radian XL that I have reprogrammed for use on a cheap Chinese flying wing . The setups gone ok everything moves the correct way even the stabilisation . The 2 questions I have relate to the stabilisation part I have no idea what to set the rate gains on a flying wing , I have it on a 3 position switch with up being off and then choice of 2 settings . I don't want heading hold just looking for a starting setting on rates and priority ? Second as you have no effective yaw control what do set the yaw rates as ? I would have thought zero as I'm only using elevons . Anyone been here and got any pointers as to a good setup ? Just for information I did it all wrong initially , the transmitter is not set up for Elevons just normal fixed wing and everything is set on the receiver including trims . So how do set trims if it's wildly out on maiden flight ? Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted January 16, 2020 Share Posted January 16, 2020 I have no idea of your flying wing setting, but want to answer your trim question All AR636a craft, are 1st flown and trimmed with the unit switched off. Stabilisation is then applied, and the AR636a can then maintain your setting Quote Link to comment Share on other sites More sharing options...
Brian Dorricott 1 Posted January 16, 2020 Author Share Posted January 16, 2020 Thank you Denis that makes sense otherwise you would never be able to trim it properly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.