Peter Etherington 1 Posted April 21, 2022 Share Posted April 21, 2022 Hi, building a BB Standard Buccaneer and cant understand if the wing tip goes at the bottom or the middle of the 1/2 x 1/2 leading edge if you understand what I mean. On the plan it shows a dotted line where the tip meets the leading edge. This is the first time that I have built a R/C plane in 40 years ! The one prior to this was a Flair Puppeteer. Many thanks, Peter Quote Link to comment Share on other sites More sharing options...
Engine Doctor Posted April 21, 2022 Share Posted April 21, 2022 Can't remember for sure but think the LE is butt jointed where dotted line is on the plan . If worried about strength of joint use a scrap of 1/32 ply across the back of the joint. Quote Link to comment Share on other sites More sharing options...
Peter Etherington 1 Posted April 21, 2022 Author Share Posted April 21, 2022 Thanks, looking at it I reckon the tip goes to the middle of the LE, and like you say the tip is butt jointed to the LE and also to the TE. Peter Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.