Mike Blandford Posted January 13 Author Share Posted January 13 Version 80 of the UNI firmware is now published. This adds FBUS support, for control and telemetry, to all receivers (on the SPort signal). X6R,X8R,X4R etc. enable telemetry, regardless of how the bind was done, when not activated. G-RX6 and G-RX8 allow the built in vario to be disabled, hold the "bind" button pressed for 4, or more, seconds to toggles the setting. The blue LED will flash 3 times to indicate the action. To enable FBUS you need UNI-Setup6.lua (or later), or XxRsetv5.bas for erskyTx. Included with the LUA file is a LUAC file in case radios do not have enough memory available to compile it. Files are here: [URL="https://forum.alofthobbies.com/index.php?threads/uni-receiver-firmware-release-files-universal-accst-d16.3270/"]https://forum.alofthobbies.com/index.php?threads/uni-receiver-firmware-release-files-universal-accst-d16.3270/[/URL] This update is only required if you need FBUS or to be able to disable the built in vario. Mike 1 Quote Link to comment Share on other sites More sharing options...
jimsoars Posted February 5 Share Posted February 5 Hi Mike, I am now running Ethos on my X20 and the activate lua script does not show up. The statistics one is fine. Any idea why the radio would not recognize the availability of the activate script. I have loaded the ethos versions on the radio. thanks - Jim Quote Link to comment Share on other sites More sharing options...
Mike Blandford Posted Saturday at 15:40 Author Share Posted Saturday at 15:40 I've discovered that the openXsensor project that runs on a RP2040 board is now supporting stabilising functions. I'm allowed to make use of the stabilising code, so I'm going to start on getting UNI to run on the S6R/S8R receivers. The first step will be to get UNI working just as a receiver, then I'll look to add the stabilising code. Both stab. and auto-level will be available, but I won't bother with "hover" or "knife edge". I've now got the basic UNI firmware running on a S8R, including FBUS support, so it is working rather like a X8R now! The only difference is the RSSI port on the S8R doesn't connect to an analog input on the processor, so I can't support a second analog input. I'll ignore the RSSI port for now. Mike 5 Quote Link to comment Share on other sites More sharing options...
Wookman Posted Sunday at 03:34 Share Posted Sunday at 03:34 Great work Mike. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.