Feugray TR-260 plan

[Formtex1947]

Would anyone who has a Peter Miller plan for the Feugray TR-260 please contact me with a 
view to selling it or allowing me to copy said plan.
Many thanks.

Richard 
Whitwick
Leices.

[Caveman]

Richard, In your previous topic where you were asking what model it was Peter Miller attached a pdf copy of the plan. 
 

Copy the pdf onto a memory stick and take it to a local print shop and they can print it out at full size. They could also adjust the scale if you needed a smaller or larger model.

 

Alternatively you can use Acrobat to print it onto several sheets of A4 paper which can be assembled into a full plan. Having said that when I’ve gone down this route I only print the parts needed.

 

GDB

Edited October 27, 2022 by Caveman

[Formtex1947]

23 hours ago, Caveman said:

Richard, In your previous topic where you were asking what model it was Peter Miller attached a pdf copy of the plan. 
 

Copy the pdf onto a memory stick and take it to a local print shop and they can print it out at full size. They could also adjust the scale if you needed a smaller or larger model.

 

Alternatively you can use Acrobat to print it onto several sheets of A4 paper which can be assembled into a full plan. Having said that when I’ve gone down this route I only print the parts needed.

 

GDB

 

23 hours ago, Caveman said:

Richard, In your previous topic where you were asking what model it was Peter Miller attached a pdf copy of the plan. 
 

Copy the pdf onto a memory stick and take it to a local print shop and they can print it out at full size. They could also adjust the scale if you needed a smaller or larger model.

 

Alternatively you can use Acrobat to print it onto several sheets of A4 paper which can be assembled into a full plan. Having said that when I’ve gone down this route I only print the parts needed.

 

GDB