Chris Dodd Posted November 30, 2023 Share Posted November 30, 2023 I have a 6 channel DMSS receiver and am having trouble mating the flap channel to aileron. I have done this numerous times before with seperate servo/channel for the ailerons, but on this occasion the model has retracts so I am using the gear port and the only available one is the aux1/flap channel. I have tried mating the gear channel and it works fine (as I have done many time before), but I cannot get the flap channel to mate. Any one have any ideas? Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted November 30, 2023 Share Posted November 30, 2023 Guessing Chris I use 9X, is the Flap switch activated ? Quote Link to comment Share on other sites More sharing options...
Chris Dodd Posted November 30, 2023 Author Share Posted November 30, 2023 I have tried to go through each setting, changing flight mode, device settings etc. trying in various combinations to no effect. Thinking about it, I will double check the left aileron works with the flap switch with everything set to normal. Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted November 30, 2023 Share Posted November 30, 2023 You tried different Aux numbers on TX ? Quote Link to comment Share on other sites More sharing options...
Chris Dodd Posted December 1, 2023 Author Share Posted December 1, 2023 16 hours ago, john stones 1 - Moderator said: You tried different Aux numbers on TX ? I have, just to try, but it is only a 6 channel receiver, and on the transmitter Aux1 isn't listed; but this is listed as Flap. Aux2 and Aux3 are obviously listed, but the receiver doesn't have those ports. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.