Jump to content

A tip for 2.4 Corona module conversion owners


Recommended Posts

Taken most of the afternoon (except when I've been on this confuser) but I found out that when doing the binding ,It is imperative to do what I have never done before
You must switch on the Rx BEFORE the Tx  And switch off the Tx BEFORE the Rx ! That way I have found the binding to remain permanently!
Hope this info is useful
G-UMPY
PS When will this weather improve ?
Link to comment
Share on other sites

  • 2 years later...
Posted by Myron Beaumont on 19/05/2009 23:36:43:
Taken most of the afternoon (except when I've been on this confuser) but I found out that when doing the binding ,It is imperative to do what I have never done before
You must switch on the Rx BEFORE the Tx And switch off the Tx BEFORE the Rx ! That way I have found the binding to remain permanently!

Funnily enough, that's exactly what Corona tells you to do in the instructions.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...