Eddie Flux Posted May 20, 2009 Share Posted May 20, 2009 Purchased this charger at Blackbushe it's fine on 12v battery, but on my JP ultra power PSU gives input voltage error. The JP works fine with my other charger, can anyone suggest a solution. Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted May 20, 2009 Share Posted May 20, 2009 Does it happen on all settings or only high current charge cycles etc? Edited By Timbo - Moderator on 20/05/2009 22:54:08 Quote Link to comment Share on other sites More sharing options...
Delta Whiskey Posted May 21, 2009 Share Posted May 21, 2009 Not sure what's wrong eddie, as I only use mine on a 12v battery, it's an excellent choice especially at around £40 which I paid ! Handles all battery types too ! Quote Link to comment Share on other sites More sharing options...
Eddie Flux Posted May 21, 2009 Author Share Posted May 21, 2009 Sorry about delay but somehow lost the computer last night. I havn't had the chance to use it on the PSU, as after a couple of TURNIGY flashes it comes up with voltage error screen. Contacted GO BRUSHLESS today and they think it's the PSU. The charger that works on the PSU is a Hitec CG-340 nicd nimh only. Quote Link to comment Share on other sites More sharing options...
Frank Skilbeck Posted May 30, 2009 Share Posted May 30, 2009 My Accucell 6 works fine on my Maplins PSU. Quote Link to comment Share on other sites More sharing options...
Stan Davey Posted August 24, 2009 Share Posted August 24, 2009 i have the same problem w/this charger. Identical batteries, some work others give voltage input errors. One I got to work by putting a new plug on. When it works its nice but... Quote Link to comment Share on other sites More sharing options...
Delta Whiskey Posted August 25, 2009 Share Posted August 25, 2009 I get an input voltage error too when the car battery gets low...re charging it the error goes away and is good enough for my model charging needs for around 2 months per charge on a 60amp car battery. Quote Link to comment Share on other sites More sharing options...
Delta Whiskey Posted August 25, 2009 Share Posted August 25, 2009 I just be given some 1350mah TP lipo and notice the balance connector on them will not work with this charger, how do I get around this, is there a pcb to buy? Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted August 25, 2009 Share Posted August 25, 2009 BRC hobbies amongst others stock quite wide range of convertor leads.I take it you have read THIS The Turnigy system uses the more common JST XH style of connector for the balancer.Edited By Timbo - Moderator on 25/08/2009 15:51:06 Quote Link to comment Share on other sites More sharing options...
Delta Whiskey Posted August 25, 2009 Share Posted August 25, 2009 Reading now - thx Tim Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.