Kappie Posted November 23, 2009 Share Posted November 23, 2009 Good day all, I have treated myself to an early X-mas present in a Piper Pawnee 15e. I have some of the above servos idle and was wondering wether these would be fine in my new plane? Any advise would be appreciated. Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted November 23, 2009 Share Posted November 23, 2009 I should think they will do fine. Quote Link to comment Share on other sites More sharing options...
Erfolg Posted November 23, 2009 Share Posted November 23, 2009 Use them all the time. My only reservation is the torque, which I think is 1.2kg per cm. Fine for most electrics. May be more of an issue if a Ripmax Spitfire in a dive with power full on. Yet I remember when modelers flew 60 cu inch warplanes with one servo driving both ailerons,which had very similar torque, with little difficulty? The cost is right, durability good. I have bought some more expensive servos on the basis if the gear train was damaged I would be able to get replacements. Others seem to be able to do this, I could not without ordering them as a spare. It was easier and cheaper (not quite, but near enough) to replace with SG90. Erfolg Quote Link to comment Share on other sites More sharing options...
Kappie Posted November 24, 2009 Author Share Posted November 24, 2009 Thanks a lot guys, will use them. Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.