
Roger Adams
Members-
Posts
101 -
Joined
-
Last visited
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
Roger Adams's Achievements
1
Reputation
-
Advice sought on best bank account for clubs
Roger Adams replied to Roger Adams's topic in Flying Sites and Clubs
Sorry Paul, I gave all the money to my daughter when she had an accident whilst travelling abroad and had to ring me on a friends phone because her’s was damaged. I’m sure she will pay it back one day. 😉 Thanks guys, the NatWest account looks interesting, I’m still waiting to see if one of my co-signatories banks with them. If so that might be the solution. In truth though it may only be a temporary solution, the Lloyds account was very similar until it was withdrawn with only 3 months warning. The cynic in me expects NatWest to follow what seems to be the end of free banking, but I hope I’m wrong. Keith, my interpretation of the Lloyds changes are: £4.25 a month regardless of volume, up to 100 electronic transfers a month included, cash deposits & withdrawals £0.42 or £0.75 per £100 depending on method, cheques in £0.42 or £0.50 depending on method, cheques out £0.50. I know I can get most people to bank electronically, but the £51 a year maintenance fee is a significant charge for a small club. Thanks again for the replies. Roger -
I am the treasurer of my local club which has been using a lloyds bank treasurer account for twenty years or so, that has always provided free banking. This is about to change from the middle of January when there will be a monthly charge and individual transaction charges applied. My initial survey of alternatives from high street banks has failed to find any free alternatives. Have any club treasurers got any recommendations on accounts that minimise the banking costs? My current front runners are Virgin money, who are offering free banking on any month that does not exceed 10 transactions, and Metro Bank who are offering no charges for the first 2 years. I’ve still got lots to look at, but am hoping others experience will steer me in the right direction. TIA Roger
-
The mirror feature is on the create menu, the menu also contains the revolve feature that you used to create the cone. A useful feature to know is the ‘s’ key. Typing an s will bring up a dialog box. Then typing the first couple of characters of the feature/command you are looking for will give a list of available features that you can select directly. Can be easier than searching the menus. Enjoy your fusion experience. Roger
-
I’ve just tried the method I suggested and although it basically works the result is not exactly as you or I would wish. Having reread how you got to this point the following does work. Go back to when you had a single cone. (Before the copy and move) Create a new sketch on the same plane as your original trapezium. This sketch contains a single rectangle that covers the portion of the cone that will overlap the second cone. The size is not critical so long as is big enough, oversize is good. Extrude the rectangle symmetrically to cut away all of the unwanted portion of the cone. The extrude tool should automatically assume the cut mode and will show the cut portion in red until you press the ok. If you have not ticked the box to keep the tool the block formed by extruding the rectangle will be discarded. Now use the mirror tool. Select the cone as the object to be mirrored, then select the cut face created by the previous extrude as the mirror plane. Ensure the operation is join and press ok.
-
1. Construct a plane running vertically near the middle of one of the cones. Do this from the construction menu, and use the offset plane option. 2. create a sketch on the new plane. 3. Project the edge created by the intersection of the cones. Choose the edge that is not visible in your view above. This will produce a parabola shape in your sketch. 4. add a line joining the ends of the parabola to create a profile and finish the sketch. 5. extrude the profile far enough to form a solid through the intersection of the two cones. 6. Use the combine tool, selecting the cut option, using the new solid to cut the cones. there are numerous ways to accomplish this. But this is the easiest way I could think to describe. Although it sounds long and convoluted it is all straight forward. Roger
-
There is no specific cut tool. The cutting function is actually an option of the combine tool, not exactly intuitive. 1. Model the cutout shape asa solid body. 2. select the combine function. 3. choose the body to be cut as the target body. 4. Choose the cutout body (stage 1) as the tool body. 5. Set the operation as ‘cut’, it probably defaults to join. ( the cutout should turn red) 6. select OK job done There is a tick box option in the combine dialog which controls the preservation of the body used as a tool. Depending on whether this is ticked or not will determine whether the tool body is kept after the cut or is discarded. Once you’ve used it once you’ll wonder haw you missed it. Hope this helps.
-
Roger Adams joined the community
-
Advent Prize Draw - 24th Dec - last one!
Roger Adams replied to David Ashby's topic in All Things Model Flying
My last attempt -
Yes please
-
Yes please
-
Me too please
-
One more time please
-
I’m still trying
-
Yes please
-
Me too please
-
In early today