Robert Putley 1

Hello, I have a Spektrum DX10t transmitter and I wish to use the Gyro template which is shown in the manual. It is not amongst the template shown on scrolling through the menu. How do I access this?

Hello, thank you all very much indeed for ll the above advice. i shall most likely go in the direction of stand offs. Not yet quite made up my mind. Thanks again.

Morning all !! Many thanks for all your ideas and solutions I shall have a closer look at these late in the day. It may take a few days, but I shall let you know in which direction I choose to go. Thanks again.

I have purchased a Phoenix Models Sebach 1.45mm model,and i intend to powered with an electric motoe rather than glow which I think this model is for.They say it can be also powered by an electric motor but the fittings for this are inadequate. I needmotor stand offs of approx 10cms. Where can I purcase these as the longest I have found so far are only 8cms in length.

Thank you for that Steve, all done and dusted now. Funily enough also had trouble setting up a smidge of down elevator viaa a mixer. it works fine until I reach 68% throttle thenit reverts back to neutral!!

I shall accept your offer Matty, and many thanks.

Hello Steve, for my sailplane it doed not matter wether or not the manual covers powered ones. Thanks for the web site, however I have already tried that one, but i cannot see anywhere that enables me to buy a copy.

Steve Dunn, Hi, Have a Spektrum DX9. I have a Discus glider with 3 servo wings. Having real problems setting this up. The manual you recomend does not cover sailplanes. Mr knight does howver do a manual to cover sailplanes using Spektrum DX9 to Dx18 TX`s. I have found this website but i cannot see how one can prchase or download the manual. Do you have any ideas?

I also have experienced the exact same problem, and had given up on finding a solution. So, I shall be following this with keen interest.

When I purchased my DX9 seven or eight years ago, I found that the supplied did not work. Purchased a fresh (different brand) SD card and hey presto, no probs! So you might give that a try.

A very intesting article in this months precision aerobatics. I am referring to the piece about the "Flight Coach". Where can I purchase the software for this?

Matty, keeping you in the loop, have right now posted a thread on RC Roups.

I also have been having problems with OS F plugs with my Laser 80, getting through several per season. Am interersted to try the JP plugs that you mention. I checked out SMC`s web site but no luck their. Can you tell me where I can obtain these plugs John?

Hello Matty, No, I hope to look at this in a few days hence. When i have done so, I shall get back om=n here and give you a full report! Once again, many thanks, Robert

Matty, Thank you very much for the above info. Looks very promising. Shall also save this.. RCG Andy Kunz.

What would a "Master funcion" be Steve?

Ah, Nigel R. Both sides work only as ailerons, and yes it is just the trim for the starboad wing which has gone AWOL. John, tried that, definately doesn`t work either. But thanks for help.

Ah, Nigel R. Both sides work only as ailerons, and yes it is just the trim for the starboad wing which has gone AWOL.

Firstly, Dennis, your comments were taken in good grace, and many thnks for those. Now Simon! I too have heard od Spektrum settings haven taken leave of their senses, leading to changed settings. Your switching off theory could possibly be the culprit. Should I not be able to solve this annoying problem, I will first of all, save the memory, then manually reinstall all settings, them keep my fingers crossed that all will turn out as should be!!

I shall do that Denise. it would be surprising if the wing setting would have changed of its own accord.

Hello, I have Discus scale glider,with the usual flaps and spoilers. The TX is a Spektrum DX9 which has given me faultless service since i made my purchase when it was initially released on the mk many years ago. I have the flaps coupled to the ailerons. Now something rather odd has occurred. The aileron trim on the transmitter now only works on the port wing, I.e. both aileron and flap move up or down in unison, however, on tjhe port wing neither aileron or flap respond to the trim input. On any of my other models which have dual aileron servos, no problem. Anyone have any ideas on how to solve this conundrum please?

Many years ago, Mike Murphy buillt a scale model of an unflown flying wing without board rudders and i think powered by four of his own turbines. Does anyone known wether or not the aircraft was a Horten?

Thank to all for answering my query. I asked because I have been offered a set, and althougjht i have not read of any problems with this set, I am a little bit consered of the set only having a single ariel.

I have a Spektrum 10t. I would like to know wether or not this TX is fitted with a second internal ariel?

Many thanks Andy. I have emailed them to see if they have a suitable fit.