lightning 759

hi just a update .progress continues all be it slowly . everything a bit square at the moment will leave the shaping bit to as late as possible as I would only inflict hanger rash on it while still building , the retracts might be a bit long in the leg but I had these waiting to find a home so they will have to do Andy

will watch with interest couple of Ivan's project's I wondered about , one day might get round to it andy

used their servos had no problems , intend using them for my next speed controllers soon andy

hi Adrian thanks for the info/pictures andy

looking forward to this ,could possibly be another on my wish list andy

hi Andy Any chance of a pic of how you fix the batteries in the nacelles please thanks andy

Posted by john stones 1 on 22/12/2016 13:42:20: Posted by lightning 759 on 22/12/2016 06:34:04: this two at our club are monsters but great flyers andy Edited By lightning 759 on 22/12/2016 06:34:56 That Stuarts Andy ? John yep bottom picture

      this two at our club are monsters but great flyers andy Edited By lightning 759 on 22/12/2016 06:34:56

, truth be told we ALL have particular pilots who we don't enjoy/like flying alongside, what's being flown is not the problem...how and by who sometimes is...and that go's with all disciplines. John or ship them off to another club andy

Posted by MaxG on 11/12/2016 16:32:57: As an aside, Alconbury used to have a nice Aggressor F5 as the gate guardian. Maxg was a fiberglass one I believe andy

such a shame there's not much uptake on your kits guess its the world we live in now ,still a couple on your website that are on my bucket list , must say though the quality of the ju88 is superb specially the foam core parts their Rolls Royce quality Andy

hi progressing slowly with my kit (my choice, nothing to do with the kit in case anybody was wondering ) but if your reading this Richard I would just like to say that the foam/veneer parts wings etc. are like rolls Royce quality ,I've built quite a few kits with these type of parts but these are by far the best I've come across absolutely superb Andy

hi just a quick question does the stab/tail plane need any extra strengthen i.e wing bandage or is there enough strength with the rear spar etc cheers andy

Graves RC Hobbies once you've been there no other comes close andy

did this project get any further ? andy

flying Scotsman in June ,water stop at finningley Andy

palmer plans do three sizes largest being 132 inch span ,belair can supply I think andy

Posted by Jon Harper - Laser Engines on 07/08/2016 10:18:01: Are you going for the night fighter or bomber version? not sure yet will be decided once i start the build i think andy

just received my late summer/autumn build ,many thanks Richard looking forward to it with a bit of look I can do it the justice it deserves many thanks Andy

skyshark tempest ,great flyer andy

Hi Richard will you be adding the JU88 to your website in the future ??? andy

looks great ,big question now is do I get one andy

Posted by Ton van Munsteren on 01/04/2016 21:58:05: Hi Dave, The Mustang is looking great and looking forward to more pics of the build, thanks for starting this thread. Mine is still going strong and love to fly it as much as possible. Also ready for the maidenflight of my new P51B. Cheers Ton looks great will plan befor release in the future andy

Posted by RICHARD WILLS on 15/06/2016 08:48:52: Hi Andy /Brian , We have had about ten of the Yaks flying in our club . All of the electric versions have been using a power train equivalent to a typical 1400mm FMS fighter. Typically 600kv motor , 4s 3300 or 3700 pack of about 30c . Because all of ours weigh less than 5.75lb (brown paper covered) They have very sprightly peformance , Prop wise , we use ether the FMS prop blades screwed to a dubro spinner back plate , or easier still , use the Dynam Tempest prop and spinner. I would think the Master airscrew would be similar performance . The above set up gives OS52 FS performance . Keep it light for the best result. We have flown both versions together , That set up must give 0.8 hp ! Richard Thanks for that Richard , its for the La7 getting close toi finishing now andy

don't know if I,ve missed it in reading some where but can you tell me the recommended electric set up please andy