john powles

Does anyone know if the wing off the mentor will fit on the magistor as I would like a set if they do.

Hi Jeff. a word of advise on the Tiffie be sure & get plenty of lead for C of G in the nose you will need it I,ve had to put over a lb of lead in mine & it is still not enough.

Hi Chris. the plan in the mag is under size by about 5% I know because I had mine reprinted to get it to the correct dimensions, I also contacted Tony N & he verified my corrections .I also built the model to & it requires a lot of lead in the nose to get the C of G right I put in over 1lb & its still not enough.

Hi. know the feeling about login just took 5 attempts before I got though UGh,

Hi. does anyone know anything about the Multiplex Royal Evo 12 I have one & I am having trouble getting the flap channel 6- 7 or 8 ect to work -no matter what is selected for this i.e. whether switch or slider is selected it refuses to operate investigated though monitor with no joy gone though all the relevant digital ops, with no luck. can any one help me with this .

Hi have you had a look on YouTube at the orange stabiliser there mare some helpful tips on it along with some flying to.

Hi. I to have a proxxon table saw the first one I bought the motor burned out very quickly I sent it back & they replaced it with a another new one which has been very good- 5 years now. I did get Makita 85m/m X 1/32 tungsten blade for it which proved to be brilliant at cutting most things including Alum& thin brass ,so I have no complaints with it. I did fix the fence{ extending it } so it would lock up for & aft to stop the fence moving .

Well I finally finished my Typhoon & as you may expect I've had to build a lead mine into the front cowling ,it is now up to 8.5Lb total with batts & its still not right on the C of G- the cowling now alone weighs 1.5Lb . has anybody else had this problem -I'm now wondering whether it will get of the ground at all --- looking for further mining rights to a lead mine. John Powles

hi everyone .Realflight trouble. has anyone other than me had trouble activating this programme. I have just lately loaded this sim onto my new PC only to receive a notification from realflight that it wont accept the activation code supplied to me as I had used it to often, I have sent pic's of the boxes with there code numbers on them to no avail this situation is ridiculous as I have purchased all of the items for this only now to find I cannot use it because they say I have used it to often .??

Hi Tom. thank you for the info will give the a ring & see if they will supply info on it.John

Hi out there Does any one know anything about Vortex motors I have a 50/55/ 730 kv brushless outrunner That I need information on ,-like how may Watts is it-prop sizes - ESC controller,- This is a big unit. all info on it please if possible.

here,s a tip thats useful find pringle cartons cut the top half down to about 1" cut off the bottom base glue it to the topcutoff piece & it makes a handy pin container & with its clear plastic top its easy to see whats in the container . I used several of these for screws -etc + they dont break when dropped from bench to floor .

Hi. just got around to start building mine & you know what RCM&E have done it again got plan pack & that ruddy plan is to small -only 58" span checked the mag one & it is also 58 " span also . this is not the first time this has happend to me I also bought a plan pack for the 72" Dacota which turn out to be only 68.5 " span it has now cost me over £ 25 .00 or mre to get the plans corrected to the right size.s not a good start .John powles

Sir. have been trying to purchase typhoon vac form set for the tony nehause plan without success I am being refused password that I use for the RCM&E site .I, wish to purchase the set but cannot can you help .tried phoneing to no avail.John powles

Hi Roy. I like your plunge windows ,I thought I was being clever when I do them on some of my models-its a bit fiddlerly when doing more complex shapes though.however they do look better than the stuck behind ones.