Kevin Fairgrieve Posted March 9, 2014 Author Share Posted March 9, 2014 Posted by David Ashby - RCME on 15/01/2014 07:22:03: Just catching up as I'm getting closer to starting mine. Great blog Kev. Can I just confirm you went for 0-0 incidence? Have you started yet David? Kev Quote Link to comment Share on other sites More sharing options...
Kevin Fairgrieve Posted March 30, 2014 Author Share Posted March 30, 2014 Just got back from the flying site. Well what can I say? The Mini Jazz MKII is even better than my original. Just a few clicks of right trim and away I went. Loops, stall turns, rolls, low passes all on the maiden flight. I do need to adjust the rates however. Low set to 60% and high to 100%. I never needed the high rates as it was fantastic on the low. I am going to change the high to 55% and set the low at about 45% for the next session. It was quite twitchy coming out of a sharp turn, so the rate change should help. The little SC.12 seems to have just as much poke as the .15. I love it. Kev Quote Link to comment Share on other sites More sharing options...
Phil Winks Posted March 30, 2014 Share Posted March 30, 2014 Always nice to read about a successful maiden flight Kev bet that smiley face aint nearly big enough, Phil Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted May 20, 2014 Share Posted May 20, 2014 A bit late Kev What's the verdict on the H.K. servo's you used ? John Quote Link to comment Share on other sites More sharing options...
Kevin Fairgrieve Posted May 21, 2014 Author Share Posted May 21, 2014 Posted by john stones 1 on 20/05/2014 23:44:40: A bit late Kev What's the verdict on the H.K. servo's you used ? John I really like them. They have performed faultlessly over the last couple of months. They have proved sound and reliable, so much so that I have also fitted them to my Dawn Flyer. Kev Edited By Kevin Fairgrieve on 21/05/2014 16:38:12 Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted May 21, 2014 Share Posted May 21, 2014 Cheers Kev Will try some Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.