Andy wilks 1 Posted July 12, 2015 Share Posted July 12, 2015 Hi I am restoring a phase 6 and can't seem to fin out where to get these Not sure if the pic has worked Edited By Andy wilks 1 on 12/07/2015 11:44:59 Quote Link to comment Share on other sites More sharing options...
Phil Cooke Posted July 12, 2015 Share Posted July 12, 2015 No picture as you suspected - what parts do you need?? Quote Link to comment Share on other sites More sharing options...
Stevo Posted July 12, 2015 Share Posted July 12, 2015 Waiting with anticipation here Andy!! Quote Link to comment Share on other sites More sharing options...
Andy wilks 1 Posted July 12, 2015 Author Share Posted July 12, 2015 Figured it. these are threaded onto the airleron pushrods for use with a single servo Quote Link to comment Share on other sites More sharing options...
Former Member Posted July 12, 2015 Share Posted July 12, 2015 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Stevo Posted July 12, 2015 Share Posted July 12, 2015 Depends on your level of "restoration" - if the covering on the wings is off, I would fit a servo per aileron, much better idea as our Percy says Quote Link to comment Share on other sites More sharing options...
Andy wilks 1 Posted July 12, 2015 Author Share Posted July 12, 2015 its the plastic ends i'm looking for the torque rods ar ok Quote Link to comment Share on other sites More sharing options...
Andy wilks 1 Posted July 12, 2015 Author Share Posted July 12, 2015 would like to set it up as is, i like the clean lines without the control rods being visible Quote Link to comment Share on other sites More sharing options...
Andy wilks 1 Posted July 12, 2015 Author Share Posted July 12, 2015 thanks for the info guys unfortunately just finished recovering it. But i will use it as is for the summer and look at a 2 servo wing at the end of the season Quote Link to comment Share on other sites More sharing options...
Stevo Posted July 12, 2015 Share Posted July 12, 2015 Aha... Take a look at this...Ive got some of the black plastic bits in the workshop somewhere Not sure of theywould do though... Quote Link to comment Share on other sites More sharing options...
Former Member Posted July 12, 2015 Share Posted July 12, 2015 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Andy wilks 1 Posted July 12, 2015 Author Share Posted July 12, 2015 Thanks Percy Now there's an idea if i can't buy the ends i will use the clevis idea. I take the single servo idea is pretty old (i've no idea how old this bird is bought it at a show looking very sorry for itself) Not sure if the black bit would do it as these stick up. Quote Link to comment Share on other sites More sharing options...
Stevo Posted July 12, 2015 Share Posted July 12, 2015 No dice... I've searched through RadioActive, SLEC, Ripmax, ebay, and Nexus. I know exactly what you are after, I've seen them on my trainers etc... I'veeven searched my spares drawer,... I think you are down to the clevis idea, but make sure they are secured with a locknut.. Edited By Stevo on 12/07/2015 12:19:54 Edited By Stevo on 12/07/2015 12:24:14 Quote Link to comment Share on other sites More sharing options...
Engine Doctor Posted July 12, 2015 Share Posted July 12, 2015 Posted by Andy wilks 1 on 12/07/2015 11:52:53: its the plastic ends i'm looking for the torque rods ar ok The ends look flat and molded on? current type are screwed on to the torque rods . . If un available go for the two servo method . If you really want to keep a single servo then it may mean changing the torque rods to a currently available type quite a lot of hassle . Differential can still be used with a single servo by connecting the push rods to a different part of a servo disc as used prior to computer Tx's . Quote Link to comment Share on other sites More sharing options...
Former Member Posted July 12, 2015 Share Posted July 12, 2015 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Stevo Posted July 12, 2015 Share Posted July 12, 2015 Blimey this is like the quest for the Holy Grail! Searched micro Mold on the 'net and I get a few bits but nothing like you are looking for,, Quote Link to comment Share on other sites More sharing options...
Stevo Posted July 12, 2015 Share Posted July 12, 2015 Closer... Not the exact product, but similar in function... I now withdraw from the contest... I'm off to search for Lord Lucan... I may have better luck! Edited By Stevo on 12/07/2015 13:17:18 Quote Link to comment Share on other sites More sharing options...
Former Member Posted July 12, 2015 Share Posted July 12, 2015 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Keith Berriman Posted July 12, 2015 Share Posted July 12, 2015 Hi Andy PM sent but to advise on Line I have two of what you are looking for. Quote Link to comment Share on other sites More sharing options...
Andy wilks 1 Posted July 12, 2015 Author Share Posted July 12, 2015 Hi Guys Thankyou fro all your help and thanks for the major investigation Stevo (lord Lucan might be easier to find), didn't think something like this would be so hard to find. Seems like RC plane flyer has saved the day though What an excellent place this forum is. Quote Link to comment Share on other sites More sharing options...
Stevo Posted July 12, 2015 Share Posted July 12, 2015 The pleasure is all ours... one satisfied customer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.