John Keywood Posted January 21, 2016 Share Posted January 21, 2016 Can any one help? I have a Night Hawk 250 with an Open Pilot CC3d Evo Flight controller. I have downloaded the software to my computer but every time I try to open the download on my computer a message comes up ' Openpilotgcs exe has stopped working'. As far as I am aware the computer says it has downloaded correctly but it will not run. Has any one any idea what I may be doing wrong. Quote Link to comment Share on other sites More sharing options...
Dickw Posted January 21, 2016 Share Posted January 21, 2016 I have not had any problems myself, so can't really help directly, but there is a complete thread on Open Pilot /CC3D issues on this multi rotor forum:- **LINK** A quick browse through that might throw up some ideas. Dick Quote Link to comment Share on other sites More sharing options...
John Keywood Posted January 21, 2016 Author Share Posted January 21, 2016 Thank you Dick, I looked through that forum and the sugestion is that the drivers do not work properly with Windows 7. My computer is running on Windows 7. I am going to upgrade to Windows 10 and try again. John Quote Link to comment Share on other sites More sharing options...
Chris Jones 7 Posted January 21, 2016 Share Posted January 21, 2016 The open pilot team are constantly falling out, splitting up and reforming. Try a search for Libre Pilot and use that instead, it's pretty much exactly the same but still has development from the team. Oh, and it works! Quote Link to comment Share on other sites More sharing options...
Bravo Delta Posted January 21, 2016 Share Posted January 21, 2016 If its any help I have Open pilot running on two Windows 7 professional PC's , one a laptop and one a desktop , however my Asus netbook with windows 7 starter doesn't run open pilot Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.