Tony Cook Posted April 2, 2016 Share Posted April 2, 2016 Hi all, new to UKCAA, hope to attend a couple of meetings this Year starting in skeggy with my Crescent Bullet. Inspired to build some older models Capricorn, Adagio once I get going. Cheers. Tony. Quote Link to comment Share on other sites More sharing options...
Steve Dunning Posted April 2, 2016 Share Posted April 2, 2016 Hi Tony Look forward to meeting you at one of the events. Being inspired to build is what we like to hear!!!! Steve Quote Link to comment Share on other sites More sharing options...
minty morton Posted April 3, 2016 Share Posted April 3, 2016 Come on team Bullet!!! Minty Quote Link to comment Share on other sites More sharing options...
brian ball 1 Posted April 3, 2016 Share Posted April 3, 2016 Hi Tony Nice Model thanks for the flight today good to have you aboard see you soon brian Quote Link to comment Share on other sites More sharing options...
Tony Cook Posted April 3, 2016 Author Share Posted April 3, 2016 My pleasure Brian, will leave the settings on the high rates. Nice to watch someone flying your plane, you get a different perspective on the model you've made. Just need to practice with the Bullet a bit more, that's the problem of flying several models, when they all behave differently. Cheers for now. Tony Quote Link to comment Share on other sites More sharing options...
Martyn K Posted April 4, 2016 Share Posted April 4, 2016 Hi Tony Looking forward to meeting up.. See you at Skeggy Martyn Quote Link to comment Share on other sites More sharing options...
Paul C. Posted April 8, 2016 Share Posted April 8, 2016 Hi all, Just sent off membership for ukcaa I do to have a model other than yak 54 carbon z but might go for ripmax bullet seen mintys recommendations so going for that set up. Will turn up at one of the local e events to see what's required on manouver . Paul. L Quote Link to comment Share on other sites More sharing options...
minty morton Posted April 9, 2016 Share Posted April 9, 2016 Hi Paul if you need any more info about my Bullet just PM me. Hopefully it will be at Skegness. Cheers John Quote Link to comment Share on other sites More sharing options...
Hangar 9 nut Posted April 9, 2016 Share Posted April 9, 2016 Think there is cross wires here somewhere Minty's Bullet is not a Ripmax one I have both the Ripmax one was a bad build nothing fits and you do have to change a lot of bits in the kit ! Quote Link to comment Share on other sites More sharing options...
Adam Colins 2 Posted April 13, 2016 Share Posted April 13, 2016 Hello Everyone I have just joined UKCAA Today and i hope to get out to a few events this year with my storm and hopefully something else. Look forward to meeting you all Cheers Adam Quote Link to comment Share on other sites More sharing options...
Martyn K Posted April 13, 2016 Share Posted April 13, 2016 Hi Adam Welcome. I have received your payment - thanks, but no membership form. Are you planning on attending at Skegness on Sunday? It will be nice to say hello Best wishes Martyn Quote Link to comment Share on other sites More sharing options...
Adam Colins 2 Posted April 13, 2016 Share Posted April 13, 2016 Hi Martyn, Thank you for the welcome. I posted off paypal receipt and application form this morning. You should receive it shortly. In fact i am just ordering a new plan as we speak I have gone for the Andy Nicholl Illusion. I am going to try and get up to event on Sunday, if i can get away from the grandsons birthday party. Cheers Adam Quote Link to comment Share on other sites More sharing options...
Adam Colins 2 Posted April 13, 2016 Share Posted April 13, 2016 My newest addition "STORM" Edited By Adam Colins 2 on 13/04/2016 15:36:49 Edited By Adam Colins 2 on 13/04/2016 15:42:13 Quote Link to comment Share on other sites More sharing options...
minty morton Posted April 13, 2016 Share Posted April 13, 2016 Just a bit of info for PC about my Bullet. As hangar 9 nut says, my Bullet is not a ripmax version but rather a bit of a hybrid using a fibre fuz from a Paul bardoe limited run (2 I believe) and a wing made by Steve Dunning. Hope this helps Minty Quote Link to comment Share on other sites More sharing options...
Martyn K Posted April 13, 2016 Share Posted April 13, 2016 That looks very nice Adam. If you are all dragging your Bullets along then I'll bring the flying fish - aka the 'Meteor' - as well Martyn Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted April 13, 2016 Share Posted April 13, 2016 Hannos Dalotel, I've never seen one, had DS's though John Quote Link to comment Share on other sites More sharing options...
Adam Colins 2 Posted April 18, 2016 Share Posted April 18, 2016 Hi Guys, I noticed people wearing UKCAA Jumpers and hats. Are these available? Also what is the font used for UKCAA as I would like to have some lettering printed for my model. Many Thanks Adam Quote Link to comment Share on other sites More sharing options...
Martyn K Posted April 18, 2016 Share Posted April 18, 2016 Hi Adam Printed Tee-shirts etc can be acquired from IPJ UKCAA Regalia Hats and other stitched regalia can be ordered from Elite Workwear - give them a ring and ask for Phil (the owner) and explain what you want. Very reasonable prices, Phil has been very supportive of the UKCAA The font we use is Harrington (Bold). Steve Dunning usually has the Vinyl model logos for sale but unfortunately, he couldn't make it at the weekend Martyn Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.