Steven Glazzard Posted December 4, 2016 Share Posted December 4, 2016 Hi folks, Does any one possess patterns or plans of how to make a small Wind Sock? Anything too large seems always to get stolen! A. suggestion of sizes that tend to "Stay Put" on the model field would be appreciated. Thanks all Quote Link to comment Share on other sites More sharing options...
Stuart Z Posted December 4, 2016 Share Posted December 4, 2016 Have you seen? http://www.hampshireflag.co.uk/windsocks.html? Edited By Chris Bott - Moderator on 04/12/2016 21:10:45 Quote Link to comment Share on other sites More sharing options...
Phil 9 Posted December 4, 2016 Share Posted December 4, 2016 we have ours on an extendable carbon fishing pole and has to be put away when not in use. anything not nailed down goes missing Quote Link to comment Share on other sites More sharing options...
Former Member Posted December 4, 2016 Share Posted December 4, 2016 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Gary Manuel Posted December 4, 2016 Share Posted December 4, 2016 Nobody in their right mind would pinch one of THESE. Ours is on top of a high scaffolding post bolted to a metal bracket - undo the top bolt to lower the post. You just need to fasten the sock via a swivel to an arm about 18 inches long on a suitable bearing to allow it to swing in the wind. Edit - just noticed that this new model comes with an adapter to drop straight onto a 7mm diameter pole. Edited By Gary Manuel on 04/12/2016 21:02:09 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.