winchweight Posted August 25, 2008 Share Posted August 25, 2008 Well, I now have a spare EDF setup from my wrecked Phase 3 F16. So what can I put it in? Will it fit the GWS J10?J10Of course I could just buy the Air Power F16 (which is the Phase3 F16 without power system).F16 Quote Link to comment Share on other sites More sharing options...
stuey Posted August 25, 2008 Share Posted August 25, 2008 I have been told by Motors and Rotors the motor will fit an Alfa edf model, could be a good home? I don't know the specs of the Phase 3 motor, even though i have a new F16 in the box, i haven't looked yet!! Quote Link to comment Share on other sites More sharing options...
Frank Skilbeck Posted August 25, 2008 Share Posted August 25, 2008 I'm using one of these in my Alfa Mig http://www.modelmotors.cz/index.php?page=62&kategorie=12 4750Kv, I have a Fantom but I'm not sure what the motor is in that but the fan dia and no of blades is similar to the Alfa.Note on the Alfa's the area where the battery goes is quite shallow (approx 22-24mm) so you need a thin battery, I use 1500 mah 3s Lipo's and the 2100's I use in my Fantom wouldn't fit.Alfa's are great fliers though and the detailling is excellent. Quote Link to comment Share on other sites More sharing options...
winchweight Posted August 25, 2008 Author Share Posted August 25, 2008 But don't the Alfa models come with fan and motor? I fancy a Sabre or Mig15.Also, I picked up a brand new Alfa Skyhawk from the Nats with a Spektrum AR6100 rx, all Hitec servos, only flown twice and in lovely nick, for..... £65! The battery bay is huge on this model, easily accomodating my 2200mah 3S lipos. Quote Link to comment Share on other sites More sharing options...
Frank Skilbeck Posted August 25, 2008 Share Posted August 25, 2008 Alfa Sabre and Mig come with the fan but no motor.£65 for all that, bargin Quote Link to comment Share on other sites More sharing options...
winchweight Posted August 26, 2008 Author Share Posted August 26, 2008 Frank Skilbeck wrote (see)£65 for all that, bargin Certainly is. Sadly the hatch was well and truely glued down, so I had to cut in to get the rx out to bind it, still can't complain though.Anyone flown the Alfa Huckebein (spelling...)? Quote Link to comment Share on other sites More sharing options...
James Hindle Posted August 29, 2008 Share Posted August 29, 2008 Never flown the huck but i had 3 years from my mig, gotta love the rise off grass from the little bird, 4S with a LJ jet screamer had the WOW factor heavily attached until the 5 blade rotor detatched mid flight and kind of disintegrated the aileron control, alas my Mig is dead but wait on the horizon an a7 corsair ... Quote Link to comment Share on other sites More sharing options...
winchweight Posted August 29, 2008 Author Share Posted August 29, 2008 Hurrah! Can you clarify which motor and fan you used and where you got it please? Sadly my A4 wasn't such a bargain as the motor and esc were fragged. Still, I am sorting it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.