andy paterson Posted August 9, 2019 Share Posted August 9, 2019 Hi all I have always connected the motor to esc with the lengths of cable supplied with items but can you add same cable to give 2" to 3" more . Look forward to replies Quote Link to comment Share on other sites More sharing options...
Alan Gorham_ Posted August 9, 2019 Share Posted August 9, 2019 Yes it is ok to extend the wires between the motor and ESC. Quote Link to comment Share on other sites More sharing options...
Martin Harris - Moderator Posted August 9, 2019 Share Posted August 9, 2019 Yes, no problem but ensure suitable cable and top quality soldering - avoid lengthening the battery to ESC leads though as special measures may be needed Quote Link to comment Share on other sites More sharing options...
andy paterson Posted August 9, 2019 Author Share Posted August 9, 2019 Thanks Martin and Alan Quote Link to comment Share on other sites More sharing options...
Trevor Grace 1 Posted October 16, 2019 Share Posted October 16, 2019 I am useing a 650watt motor 60amp esc and 4s lipo and need an extra 8"/200mm of wire to reach the hatch and cg on a pusher . where would i join it and what size wire. Quote Link to comment Share on other sites More sharing options...
andy paterson Posted October 16, 2019 Author Share Posted October 16, 2019 Hi Trevor https://www.4-max.co.uk/. George is very knowledgeable they will help you out and chances are they will have the wire. Quote Link to comment Share on other sites More sharing options...
Trevor Grace 1 Posted October 16, 2019 Share Posted October 16, 2019 Hi Andy, Thanks for that, Will contact him tomorrow. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.