Alan Coppen Posted June 13, 2020 Share Posted June 13, 2020 Hi, I am currently building a KK Gipsy from an original KK kit. I am making it radio assist with servo operating the rudder. I am using a LE mon Rx, micro servo, power from a 150mA 1s lipo. The problem I have is that the Rx has a molex type female 3pin connector, however all the lipos I have of this size have molex type 2pin male connectors, not sure how to proceed, can anyone help.Thank you Quote Link to comment Share on other sites More sharing options...
Nigel Dell Posted June 13, 2020 Share Posted June 13, 2020 Micron Hi Alan Have you tried Micron, I had the same problem and they sell leads, I did get the loose pins and sockets to make my own but god are they fiddly! 😳🙄 but if you are unsure an email is good and you will get it sorted, they are very good to deal with and quick, I can highly recommend them. I have the self same model and am using my 2.4g conversion of an Ace Commander. Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted June 14, 2020 Share Posted June 14, 2020 Micro servo and other leads At the Component Shop **LINK** Quote Link to comment Share on other sites More sharing options...
Alan Coppen Posted June 15, 2020 Author Share Posted June 15, 2020 Thanks for your suggestions, I contacted Andy at micron, very helpful, sorting out a lead and better battery for me. Gave me some useful information about the Lemon Rx. Thanks again. Quote Link to comment Share on other sites More sharing options...
Nigel Dell Posted June 15, 2020 Share Posted June 15, 2020 Great! Glad it helped, Andy is very helpful👍🏻 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.