Phil Lockwood Posted July 16, 2020 Share Posted July 16, 2020 I am new to the Taranis. I can no longer connect to the computer. STM32 Bootloader is missing on the computer. when I try to download the driver using Zadig - Stm32 bootloader does not show up in the Zadig download list. Quote Link to comment Share on other sites More sharing options...
john stones 1 - Moderator Posted July 16, 2020 Share Posted July 16, 2020 Bump. Quote Link to comment Share on other sites More sharing options...
Mike Blandford Posted July 16, 2020 Share Posted July 16, 2020 The USB connector is on a small board that is mounted at right angles to another board. It is quite likely a solder joint between these boards has fractured. Mike Quote Link to comment Share on other sites More sharing options...
Phil Lockwood Posted July 17, 2020 Author Share Posted July 17, 2020 John I don't understand "Bump" Mike The Taranis shows "Usb connected" on it's screen - from what I can gather, it is that "StM32 Bootloader" is missing on my computer and that is the problem. Mind yopu I don't know where its gone, everything was working fine up to the software crash. Quote Link to comment Share on other sites More sharing options...
Stephen Smith 14 Posted July 17, 2020 Share Posted July 17, 2020 Posted by Phil Lockwood on 17/07/2020 16:05:08: John I don't understand "Bump" Mike Bring up my post Quote Link to comment Share on other sites More sharing options...
Phil Lockwood Posted July 28, 2020 Author Share Posted July 28, 2020 Hi Mike Blandford, You were right - the problem was a "dicky" usb board/socket. Just got the tranny back after it had been fixed. looks like everything is fine now. Quote Link to comment Share on other sites More sharing options...
Phil Lockwood Posted July 28, 2020 Author Share Posted July 28, 2020 Thanks to everyone who tried to help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.