Stephen Jones Posted February 20, 2021 Share Posted February 20, 2021 (edited) Hi there, I won the Jumper T-Lite from Lee at Painless360. Here is the Video . Well i am well chuffed. Edited February 20, 2021 by Stephen Jones Video Quote Link to comment Share on other sites More sharing options...
Stephen Jones Posted February 20, 2021 Author Share Posted February 20, 2021 And here it is, And some more pictures. Now, i bought the wrong battery for it but no problem as i managed a work around as the battery i got is too small. Their is a warning that inserting the battery the wrong way round could damage the radio so i put red tape round one end of the battery and inside the battery bay to help any confusion. Steve Quote Link to comment Share on other sites More sharing options...
Stephen Jones Posted February 20, 2021 Author Share Posted February 20, 2021 I have been trying to bind it to my Receiver a Frsky V8R7-II but for the life of me i can not get it to Bind. It uses Open Tx and is pretty much like my Taranis i have found the section for Frsky D8 and D16 but does not Bind. Any help would be appreciated. Steve Quote Link to comment Share on other sites More sharing options...
MattyB Posted February 20, 2021 Share Posted February 20, 2021 (edited) There is a dedicated Frsky V protocol in the MPM. The full list of protocols, sub-protocols and ID numbers is on MultiModule.org here... https://www.multi-module.org/basics/supported-protocols This might help too - it demonstrates a D8 bind, but the fundamental process for a V-series RX should be no different. The section on module tuning is also useful - this is a one time process that will ensure you’ll get the maximum range available from your Frsky RXs. Edited February 20, 2021 by MattyB 1 Quote Link to comment Share on other sites More sharing options...
Stephen Jones Posted February 20, 2021 Author Share Posted February 20, 2021 2 minutes ago, MattyB said: There is a dedicated Frsky V protocol in the MPM. The full list of protocols and sub-protocols is on MultiModule.org here... https://www.multi-module.org/basics/supported-protocols Thanks i just got it working and was going to post that i have already done it. Cheers Steve. Quote Link to comment Share on other sites More sharing options...
Ron Gray Posted February 20, 2021 Share Posted February 20, 2021 I bought one last week but have bound a couple of models with Parkzone type brick RXs. I’ll check out some FrSky RXs in D8 and D16 tomorrow. Quote Link to comment Share on other sites More sharing options...
Stephen Jones Posted February 20, 2021 Author Share Posted February 20, 2021 1 minute ago, Ron Gray said: I bought one last week but have bound a couple of models with Parkzone type brick RXs. I’ll check out some FrSky RXs in D8 and D16 tomorrow. I have bound mine in D8 mode. It works ?. Cheers Steve 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.