Jump to content

SE5a plans from Flying Scale Models magazine July 2007


Ian Easton
 Share

Recommended Posts

Advert


The cheapest way to get a copy of any Outerzone plan is to download to a recent free copy of Adobe Acrobat and print it at 100percent on an A4 printer by 'Tileing' ( also tick the join lines button) and assemble with Selotape.   Half an hour with a scalpel and Selotape and an almost free plan.   I cut down the middle of left joint line leaving half of the line then overlap onto the right joint line, then selotape whilst pinned down.  Simple!

Otherwise download to a memory stick and take to a copy shop.

( the Outerzone one seems a poor copy  for the SE5 design - normally better. But it might print OK -try one section )

 

Frankly I doubt that any of the magazine collectors on the forum will part with the original magazine or original plan, but they might offer you a copy at cost. 

 

I see that Peter Rake also did a 38 inch SE5 for FSM August 2004.   Keep checking EBay for a copy of either magazine?
 

Edited by kc
Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...