Daren Cogdon Posted April 13 Share Posted April 13 I'd been wanting to build one of these for ages. I had the plans printed out and was intending on doing it over the winter, but then shifted it to the back burner for a bit. Then, I saw the recent article in RCM&E about it, so I thought "why not?" I ordered the power setup from 4-max and started chopping bits of Depron a couple of weeks ago, but really got down to it last weekend. Looks OK so far. Need to fit the firewall and cut out the control surfaces, as well as install the guts and finally paint it..... 2 Quote Link to comment Share on other sites More sharing options...
leccyflyer Posted April 13 Share Posted April 13 You'll love it - they are so manoeuvrable, so much fun to fly and do fly well on a 2s1p 800mah lipo, with a 1300kv pole and stator motor and 8x6" prop. I prefer to use a 3s1p 600mah pack, propped down to 7x6" and that gives a bit more speed, albeit over a shorter flight. 1 Quote Link to comment Share on other sites More sharing options...
Daren Cogdon Posted April 13 Author Share Posted April 13 I'm looking forward to flying it, if it goes as well as this one.... Now, I'm thinking an RAF scheme with a shark-mouth....! Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.77e29add7c1431e70c716c79b427fca9.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.