-
Posts
16,497 -
Joined
-
Last visited
-
Days Won
19
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by john stones 1 - Moderator
-
RCM&E February 2014 Issue.
john stones 1 - Moderator replied to Kevin Fairgrieve's topic in RCM&E Magazine
Argos or Screwfix catalogue, mix epoxy throw page away -
it sounds o.k Paul all I can suggest is set main needle first, then adjust slow running needle 1/8 at a time if revs drop at tickover when you remove glow, it means slow running is rich (turn needle in) also is your fuel o.k.? is possible to buy a bad gallon I've never had to use an onboard glow yet is your tank vibrating a lot, if so dampen it with foam
-
after a gallon of fuel it should be o.k. I use 5 or 10 bekra but yours should be fine O.S f plugs are what I use is your tank above carb level (centre of tank inline with carb)
-
Phoenix Pitts Bulldog
john stones 1 - Moderator replied to jeff2wings's topic in Sport, Aerobatic and 3D kits
what w/span and weight Jeff like colour scheme, stands out in any sky -
Seagull Yak 55M
john stones 1 - Moderator replied to Lee Smalley's topic in Build Blogs and Kit Reviews
pilot always bails out Lee, did it on all the 54's at our club absolutely agree with you cracking models, virtually impossible to stall flew mine on 120 4 stroke, lands like a trainer -
A place for Pushy Cat builders to hang out
john stones 1 - Moderator replied to GrahamC's topic in The 2014 Mass Build
thanks lads i'll give it a go on a 8x6 see how it go's only way to learn is get stuck in, at the price it's not worth returning. at worst i'll have a motor for sumat else. shall be yellow with black bands underneath, with state of our field of late a few lecky's is a good move. Ken a man's got to do what a man's got to do. ok pilgrim John Wayne... Pilgrim dept. -
A place for Pushy Cat builders to hang out
john stones 1 - Moderator replied to GrahamC's topic in The 2014 Mass Build
i'll kiss the mother in law and hope for the best -
A place for Pushy Cat builders to hang out
john stones 1 - Moderator replied to GrahamC's topic in The 2014 Mass Build
thanks fella's shall give it a try, I still think it's witchcraft though -
A place for Pushy Cat builders to hang out
john stones 1 - Moderator replied to GrahamC's topic in The 2014 Mass Build
I did Colin it was 1100kv from Ken just don't know what the extra 100kv means, only cheap so is no big problem. I fly them noisy messy things usually -
A place for Pushy Cat builders to hang out
john stones 1 - Moderator replied to GrahamC's topic in The 2014 Mass Build
thanks Colin I asked for 1100kv as advised but 1000 turned up not sure if to return it, or if it will do -
A place for Pushy Cat builders to hang out
john stones 1 - Moderator replied to GrahamC's topic in The 2014 Mass Build
hello all bit of advice please, I;ve bought turnigy d2830/11 1000kv motor, 30 amp esc is this o.k., if so what size props needed cheers john -
soz nasher also check pushrods line up nicely with servo's if they are a bit out give em a tweak
-
touch top of servo's pushrods its usually a bit of pressure from linkage
-
I think its a good thing, pay tax, insurance, mot you'll be o.k some have abused it for years, time it was sorted will be some errors, but its better than present system. we don't let folk fly at clubs without paying fee's and insurance drivers without tax n insurance deserve to lose the car
-
Sopwith Triplane (peanut scale)
john stones 1 - Moderator replied to Willowlea's topic in Build Blogs and Kit Reviews
Sarah why not use that spare fuzz side to perfect your technique with tissue n dope also you could claim you built it on purpose -
Sopwith Triplane (peanut scale)
john stones 1 - Moderator replied to Willowlea's topic in Build Blogs and Kit Reviews
it make's me smile just looking at it never heard of peanut scale before, the seat is very good Sarah are you putting a pilot in? or just going to glue a peanut on -
Sig Seniorita build
john stones 1 - Moderator replied to Wiltshire Flyer's topic in Traditional kits
looks very good WF, nice to be different that's the beauty of kits enjoy your summer flying -
Westwings Fournier RF4
john stones 1 - Moderator replied to Martian's topic in Build Blogs and Kit Reviews
fantastic looking sky FWAL -
Sopwith Triplane (peanut scale)
john stones 1 - Moderator replied to Willowlea's topic in Build Blogs and Kit Reviews
looking good Sarah soon be ready for covering -
a refreshing read also Roy the folks in your area, are in safe hands
-
30CC SBACH 342
john stones 1 - Moderator replied to john melia 1's topic in Sport, Aerobatic and 3D kits
Posted by john melia 1 on 08/01/2014 10:49:11: thanks rich , after reading through some of the posts I have mixed feelings about this sbach at the moment , especially after that guy stripping all the covering off to find weak dodgy joints . then on the other hand theres that vid showing the sbach pulling out of a full throttle dive with full elevator and only the wing tube bending , showing that the joints and glueing must have been ok to survive that . whats your thought rich Edited By john melia 1 on 08/01/2014 10:50:35 few lads at our club have H.K. one with DLE 30 in it flys' great you'll love it -
A place for Pushy Cat builders to hang out
john stones 1 - Moderator replied to GrahamC's topic in The 2014 Mass Build
I think canopy looks good Baz bit of something on fins maybe, to help with side on view in flight well my plans ordered, see if I can start a pushy cat society in Donny -
tim I live down the road in Doncaster, been in a few times. always get a warm welcome and quite a number of our members use the shop guess we're lucky in South Yorkshire.