Simon K 3

+ 1 for E-typhoon, or maybe even an Alex F5B (sometimes refered to as an "Enigma" on US sites) from Acemodel.co.uk. Please note, I'm not affliated to this organisation, but I did buy one of these a few years back (and still regularly fly on 4s - Could go larger on the battery but don't see the need) and it goes like stink! Blizzard and others are in my view "warmliners". Edited By Simon K 3 on 11/09/2013 14:01:49

Count me in please.

Not sure what you mean when you say "modest electric setup", but two models I'd suggest...Both big enough to see, but small enough to land on an average strip. Sebart Miss Wind 50. - Got an Scorpion 4025-12 on 16x10 prop, 80amp opto and ubec. Lovely model, smooth, predictable, VERY flattering to the pilot's ability. (though price is a bit dear) Goldwing Extra 330 Brilliant model. Mines got an Axi setup on 6s. Again brilliant model, flies extremely nicely, and is a touch bigger than the Miss Wind. And for the price... excellent. (Will 3d, but you don't have to! ... if you turn the rates down she's gorgeous!!) Nice little write up done in the last couple of days on another website HighAlpha Forum Just my two pennies worth, as they're in my fleet and I don't intend to let them go!With regards to the electric set-up, I'm sure that there would be "low / modest cost" options with the advent of Direct imports, non-branded, etc... Edited By Simon K 3 on 13/04/2011 17:09:00

I think someone needs to put the cap back on the glues and open the windows!?!?!?

Hmmm, Almost as nice as this one on unlimitedrc.co.uk New Micro F3A announcement! Edited By Simon K 3 on 01/04/2011 13:51:22

With respect the Mk2 -E and MK2 Foam-E are almost exactly the same span, so sort of understandable about the "assumption".... though you are right I'd also not spotted that. I too have not flown the Mk2 -E.  But we all know what happens when we ass-u-me! If you went for Wot 4 conversion - here's an article which might be interesting (though you've probably seen it already)...Link

I had a Wot 4 MK II and Mk III with Irvine 53 (sorry IC not E) a while back and I've flown a club mates Wot4 Foamie Mk2 recently.  Both fly nicely Traditional Wo4 on electric would require larger motor and packs  The really personal subjective answer... I personally would like a bit more power on the Wot4 foamie, but there's nothing wrong with the standard set. It also depends on what sort of conditions you want to fly in. I suspect that the traditional kit converted might have a wider window of conditions as it'd probably be heavier, but it really depends on what you're after and when / how you fly. I'd also have to think real hard about the additional cost of going with the traditional kit converted to electric, as it would require larger motor, battery packs, etc.... as the Wot4 Foamie can fly nicely on 3s and give reasonable flight times.  As I said, really depends on what you want from the model and your flying style....  Just my two pennies worth. "Opinions are like mouths..... everyone's got one" ( the polite, forum safe version of this statement).  

Would be worth taking a look at the BMFA website and locate a local club who might be able to help? I'm assuming you mean "pay for instruction"?  Whilst surfing for the best prices for rc bits and pieces, I remember seeing that Brentford rc (model shop) are offering flight training for planes and helis near Beaconsfield. Not sure if this is of use?  BTW... I have no association with this organisation and also no knowledge of the quality of their kit or training so would be worth doing a little research first?

Neil, Posted a reply to your "Hi from Basingstoke" posting. (I'm a Basingstoke and Basingstoke Model Aero Club member)Other clubs in the area are Aldershot MFC, Fleet and District.So worth looking at what's convenient to you.  I think before deciding on a model to buy, I think it would be very useful to visit a club and have a chat - it talk is free (though the occasional offer of a beer goes down well ).  There are some decisions which I think you may want to make before committing any of your hard earned cash to. (which club ,Budget, Electric or IC, 2.4Ghz or 35Mhz, Futaba, Spektrum, JR or other, and so on....)  My main piece of advice is think about what you want to get out of your flying and what your budget is. A little extra cash invested at the start can pay dividends down the line.  That all said, based upon how I've seen some new members progress, a very capable model is Wot 4 Foam-e Mk2. Having  flown one myself I was very pleasantly surprised.  Simon

Neil, Welcome to the forum; welcome to the hobby. I fly at the Basingstoke Club, and we have a club night tomorrow (Thursday) evening. We'd be more than happy for you to come along and have a chat.  Information about our site, plus directions on where the club night is can be found on our website -> BMAC  Should I be able to provide any other information, please feel free to send me a PM. Simon

Seems like the bad guys are already using large RC models for unwanted / illegal purposes.... Link  found on Highalpha forum Trouble is the rules are designed to try and stop the small minority from doing nasty things, but in reality are the bad guys going to take any notice.... probably not. Will this impact the "Jo Average flyer".... yes and for no real reason. Whilst some great flying, the minority spoil it for the majority.... shame but true.  

A1, No reason why you shouldn't use an electric starter. - Though this is pretty subjective, as long as you watch for the hydrolyic lock, already mentioned.  A2, You don't say what your "Cheapie geared starter" was... Before I made the switch to All-Electric, I ran an OS 160 and YS110 motors and had no problems with a Kavan Planetary Starter. Just make sure you've got a clean good quality glow plug, a fully charged starter battery and a starter rubber which is in a good state and finally ensure you've got a good glow ignitor battery.   Never owned a chicken stick as I thought in the event of a kick I may not get it out of the way in time.... that said the one day I forgot my starter, I elected to flick start without a glove.... you guessed it, it kicked and I spent the next two hours in casaulty having turned to remove the end of my finger.  A3. Everyone has their own ways that work for them; but prime without glow, few extra turns after primed, attach glow and use starter. Edited By Simon K 3 on 05/12/2010 08:08:19

Not making excuses as we don't know which company it is (or where you are in the country); but Most web traders are pretty good; though some do it "part time" and given the weather I maybe tempted to cut them some slack. Though £3 for a "few grams" sounds like an awful lot, even allowing for a jiffy bag. postage and a trip to the post office (If they don't collect)  I ordered a new SAS Fusion today and Alan let me know that whilst he was taking it to the post office this afternoon, nothing had moved from the Gatwick depot for a couple of days due to the snow. Absolutely nothing he can do about that; but nice of him to let me know and set expectations. (There are some great traders out there... like Alan).(Postage for an entire kit + some x-weave and vinyl tape was around a fiver! )   Hold in there; but like Tim Says, if its appropriate ... name and shame Edited By Simon K 3 on 02/12/2010 17:25:55

If RC trucks do it for you and like abusing your FLYING field, Just remember not to take a look at Ebay in next 4days and 3hrs.... Jet Truck  Might get close to BEB's video!! Edited By Simon K 3 on 02/12/2010 16:48:39

Ok, so here goes nothing, what about something REALLY different....Virgin Galatic  White knight one or two (with or without detachable space ship) or possibly  Virgin Atlantic Global Flyer