Tom Flynn 1 Posted July 4, 2016 Share Posted July 4, 2016 i have bought an old Easy Street still in the box, but no idea of the size of battery or size of motor and speed controller needed. All the drawing are showing very old electric set ups. Hoping someone can advise on a more up to date set up. Thanks. Quote Link to comment Share on other sites More sharing options...
John Rudd Posted July 4, 2016 Share Posted July 4, 2016 Original setup was a speed 600 motor and 8 cell nicad..... I know of folk flying them on an Axi 2820 motor giving vertical performance, mine still yet unflown, has an Axi 2814 in it.... You may need to add some ballast to make up for the nicad when using a lipo..... Edited By John Rudd on 04/07/2016 21:24:36 Quote Link to comment Share on other sites More sharing options...
extra slim Posted July 4, 2016 Share Posted July 4, 2016 Mine has a cheapo 1700kv outrunner and 30a ESC mystery combo. 3s 2200, hatch on the bottom, battery pushed back to CG...7x4 prop.not short of grunt...vertical...and 7-9mins Edited By extra slim on 04/07/2016 21:43:23 Quote Link to comment Share on other sites More sharing options...
Bob Cotsford Posted July 5, 2016 Share Posted July 5, 2016 mine had a 1400kv motor from GiantCod, a 35A esc and a 3S2200 pack under the wing. I think it was around 300W on a 9*5 or 6. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.