Rocker Posted January 17, 2018 Share Posted January 17, 2018 Just brought a Wots Wot ARTF .On previous ARTF (IC power ) after a while the fuel get under the covering and it starts to peel off .Anyone have any tips on how to prevent this happening .Would covering the edge of the covering with something like " Clearcoat" be any good ? Quote Link to comment Share on other sites More sharing options...
Martin Harris - Moderator Posted January 17, 2018 Share Posted January 17, 2018 Yes! Quote Link to comment Share on other sites More sharing options...
Cuban8 Posted January 17, 2018 Share Posted January 17, 2018 Answered your own question. Get a small artists' brush and go over all the joints, decal edges, trim edges etc with Clearcote. It takes a while but it's well worth the trouble - make sure everything's well ironed down beforehand as it makes a mess if you accidently go over a Clearcoted surface with the iron afterwards. I've only just sold on an old H9 Aresti 40 that still looked pretty good after being given the above treatment - the buyer remarking how tidy the 12 years old ARTF model still looked. Edited By Cuban8 on 17/01/2018 11:42:08 Quote Link to comment Share on other sites More sharing options...
Former Member Posted January 17, 2018 Share Posted January 17, 2018 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.