phil alvirez Posted June 17, 2018 Share Posted June 17, 2018 i see that there are differences between the new DX6 and its versions G2 and G3, so am starting this hopping will be discussed. and as i have a question regarding programming it, here i come, hopping again that some1 will be able to help: am trying to program it to have some 'down' trim when climbing. i fly electric gliders, and they increase the tendency to climb under power. so far i have learned that i start by getting into system setting i select a switch, enable it and i now can switch to any 3 positions. now i need to learn how to increase or decrease the amount of signal until reach the convenient amount. thanks Quote Link to comment Share on other sites More sharing options...
phil alvirez Posted June 17, 2018 Author Share Posted June 17, 2018 i got into fmode,, selected a switch, and i see that when i flip it changes the number down there. great. so now what is next? i need to learn how to increase or decrease the amount of signal until reach the convenient amount. Quote Link to comment Share on other sites More sharing options...
Robert Putley 1 Posted June 17, 2018 Share Posted June 17, 2018 I would also be interested in ths. Quote Link to comment Share on other sites More sharing options...
PatMc Posted June 17, 2018 Share Posted June 17, 2018 Posted by phil alvirez on 17/06/2018 02:21:52: i got into fmode,, selected a switch, and i see that when i flip it changes the number down there. great. so now what is next? i need to learn how to increase or decrease the amount of signal until reach the convenient amount. Trial and error, I suggest starting with 10% down. Quote Link to comment Share on other sites More sharing options...
Speedster Posted June 17, 2018 Share Posted June 17, 2018 As I understand your question: You want to give it a bit of down elevator when using the motor... Just Go to mixes Set it to Motor>elevator and adjust it with removed prop (Or a external rx battery instead of the esc, so the motor don't run   Normally 1-2 mm down will do it.. S Quote Link to comment Share on other sites More sharing options...
Robert Putley 1 Posted June 17, 2018 Share Posted June 17, 2018 Is it possible using a Spektrum DX9, also DX10t to, via a switch to have 10% up elevator for hand launching a model. Quote Link to comment Share on other sites More sharing options...
Former Member Posted June 17, 2018 Share Posted June 17, 2018 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
Speedster Posted June 17, 2018 Share Posted June 17, 2018 Posted by Robert Putley 1 on 17/06/2018 13:23:45: Is it possible using a Spektrum DX9, also DX10t to, via a switch to have 10% up elevator for hand launching a model. No problem You can do it by using the flt mode and set it up there. Or make a mix aux 3 >elev Then set the switch you want And set the elevator as you want And fly S Quote Link to comment Share on other sites More sharing options...
Robert Putley 1 Posted June 17, 2018 Share Posted June 17, 2018 Many thanks Speedster, I shall give that a whirl. 😊 Quote Link to comment Share on other sites More sharing options...
Robert Putley 1 Posted June 17, 2018 Share Posted June 17, 2018 Problem solved S. Thanks again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.