Zflyer Posted March 5, 2019 Share Posted March 5, 2019 Hello folks (Harry Secombe anyone), I have the Hangar 9 P51 10cc and am looking for control surface setup if anyone can help. Chiz Quote Link to comment Share on other sites More sharing options...
Alan Gorham_ Posted March 5, 2019 Share Posted March 5, 2019 I just Googled "Hangar 9 10cc Mustang" and found the manual for download on this page: **LINK** It will probably have the answer in there. Quote Link to comment Share on other sites More sharing options...
Zflyer Posted March 5, 2019 Author Share Posted March 5, 2019 Thanks Alan, I have the manual and couldn't find anything in there re control surface parameters, it has the tx setup for the AS3 X and details for engine setup. All very useful I guess it will have to be a gentle maiden flight and easy on the controls.... Quote Link to comment Share on other sites More sharing options...
Alan Gorham_ Posted March 5, 2019 Share Posted March 5, 2019 Assuming you have the same model as the link I found (10cc Blue Nose) then the control throws ARE in the manual. What puzzles me is your reference to AS3X settings. Are you sure you don't have this model: P-51 Mustang S 8cc BNF Gas Trainer with SAFE® 54.7" In which case the manual does tell you how to set up the mechanical linkages and the transmitter travel volumes. Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted March 5, 2019 Share Posted March 5, 2019 Follow the link that Alan has given you Zflyer An extra page of control surface set up is added at the very end It has page 61 typed in But page 33 on my viewer Has all the control movents Edited By Denis Watkins on 05/03/2019 14:06:23 Quote Link to comment Share on other sites More sharing options...
Zflyer Posted March 5, 2019 Author Share Posted March 5, 2019 I will see if i have tbe add on page at the end Chiz Quote Link to comment Share on other sites More sharing options...
Zflyer Posted March 5, 2019 Author Share Posted March 5, 2019 It is the Hangar 9 Mustang and it gives the AS3 X tx settings, however this does not give the actual surface setups. Hey ho Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted March 5, 2019 Share Posted March 5, 2019 The settings for the 60 size,10cc Mustang are on page 33 of Alan's link Typed page 61 I cannot copy on this android Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.