Mark Gannon Posted June 13, 2019 Share Posted June 13, 2019 Hi All, I'm planning to convert a West Wings Puss Moth rubber powered balsa kit (610 mm wingspan) into 3 channel electric RC. I've never dabbled with electric motors before so does anyone have any idea of what size motor I should be using. Thanks Quote Link to comment Share on other sites More sharing options...
Dwain Dibley. Posted June 13, 2019 Share Posted June 13, 2019 A lot of guys use the innards out of the Eflite Vapour models. D.D. Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted June 13, 2019 Share Posted June 13, 2019 Check out Micron radio control.com Quote Link to comment Share on other sites More sharing options...
Mark Gannon Posted June 13, 2019 Author Share Posted June 13, 2019 Thanks guys. Will look at both options Quote Link to comment Share on other sites More sharing options...
kevin b Posted June 13, 2019 Share Posted June 13, 2019 Hi Mark. I just replied to your other thread and then saw this one. Here is a good place to start. **LINK** These people are really helpful. **LINK** If this is a progression in your building, you don't need to go for expensive branded motors, escs and Lipos. There are lots of cheap & cheerful alternatives out there. Just get opinions from the forum before parting with your cash. Kevin b Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.