Trevor Grace 1 Posted February 27, 2020 Share Posted February 27, 2020 trying to set up the end point adjustment on ailerons but the curser refuses to land on the left hand wing servo in "end point adjust" window Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted February 27, 2020 Share Posted February 27, 2020 Are you using Left Stick at the same time Trevor Push the aileron stick left and hold it there Quote Link to comment Share on other sites More sharing options...
Trevor Grace 1 Posted February 27, 2020 Author Share Posted February 27, 2020 yes but its landing on R every time. Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted February 27, 2020 Share Posted February 27, 2020 There are a few DX7 Does yours have a thumb wheel of just up and down button Also make sure that your aileron trim is somewhere near the middle Edited By Denis Watkins on 27/02/2020 16:43:26 Quote Link to comment Share on other sites More sharing options...
Trevor Grace 1 Posted February 27, 2020 Author Share Posted February 27, 2020 trims ok just up & down buttons Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted February 27, 2020 Share Posted February 27, 2020 So you can go up and down scrolling through the menus Quote Link to comment Share on other sites More sharing options...
Philip Barrett 2 Posted February 27, 2020 Share Posted February 27, 2020 This may be due to the throws being reversed. Try moving the stick to the right and see if the cursor goes to the left. Quote Link to comment Share on other sites More sharing options...
Trevor Grace 1 Posted February 28, 2020 Author Share Posted February 28, 2020 think my tranny just died,charged overnight ok, turn on lights up, nothing else working, very old has done well. Quote Link to comment Share on other sites More sharing options...
Trevor Grace 1 Posted February 29, 2020 Author Share Posted February 29, 2020 So, cant afford a new one .......Charged overnight -OK Switched on-OK Lights up-OK Works throws on last prog entered-OK Trims working-OK WILL NOT ENTER ANY OTHER PROG. Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted February 29, 2020 Share Posted February 29, 2020 2 things Trevor We don't charge overnight, as things can overheat and go wrong Best using a smart charger, to cut in and out when charged The Tx after all these years seems to have faulty up and down switch Easily replaced it you can get one or Mike Ridley at Modelradioworkshop.co.uk Quote Link to comment Share on other sites More sharing options...
Trevor Grace 1 Posted March 1, 2020 Author Share Posted March 1, 2020 thanks Denis, will try new switch Quote Link to comment Share on other sites More sharing options...
Trevor Grace 1 Posted March 1, 2020 Author Share Posted March 1, 2020 Hi Denis, what "up & down" switch are you referring to. Quote Link to comment Share on other sites More sharing options...
Colin Carpenter Posted March 1, 2020 Share Posted March 1, 2020 Just a thought but is it worth squirting contact cleaner in there ? Screwfix plastic safe one cleans Blade micro servos a treat ! Saves replacing ! I have also used it to clean u\s TV remotes with excellent results. Also a gas fire piezoelectric sparker as well ! Colin. Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted March 1, 2020 Share Posted March 1, 2020 Posted by Trevor Grace 1 on 29/02/2020 12:06:11: WILL NOT ENTER ANY OTHER PROG Trevor You said your programme button would move on Edited By Denis Watkins on 01/03/2020 11:43:57 Quote Link to comment Share on other sites More sharing options...
Trevor Grace 1 Posted March 1, 2020 Author Share Posted March 1, 2020 not sure where you are with your last post Denis. PS your views on contact cleaner !! Quote Link to comment Share on other sites More sharing options...
Don Fry Posted March 1, 2020 Share Posted March 1, 2020 Posted by Colin Carpenter on 01/03/2020 10:54:53: Just a thought but is it worth squirting contact cleaner in there ? Screwfix plastic safe one cleans Blade micro servos a treat ! Saves replacing ! I have also used it to clean u\s TV remotes with excellent results. Also a gas fire piezoelectric sparker as well ! Colin. Are you sure you wish to risk the airframe to some cleaned up contacts? Accepted, small hacks, hack away if you wish. But there comes a point as they get bigger, where a corroded contact is a potential expensive, many hours mistake. Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted March 1, 2020 Share Posted March 1, 2020 Posted by Trevor Grace 1 on 01/03/2020 17:24:54: not sure where you are with your last post Denis. PS your views on contact cleaner !! Apologies Trevor, prescriptive text got me again. You implied that you could not change menu, which implies a faulty switch The switch which will not change the menu, just be the one to change I agree with Don that I would only fly with equipment that does not need switch cleaner But Switch cleaner can most definitely work If the switch does work after a spray Then I would change it for a new one Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.