Jonathan S Posted October 1, 2020 Share Posted October 1, 2020 All, I am looking to replace the screws on my AcroWot Foam-e. I would prefer to replace these screws with Hex bolts if possible as I have rounded off the heads on my current set. Does anybody know what size etc i should be looking for. thanks Jon Quote Link to comment Share on other sites More sharing options...
John Lee Posted October 1, 2020 Share Posted October 1, 2020 Link to Modelfixings No4 Cap Head Woodscrews which should do the job nicely. Quote Link to comment Share on other sites More sharing options...
Mike T Posted October 1, 2020 Share Posted October 1, 2020 Posted by John Lee on 01/10/2020 14:24:14: Link to Modelfixings No4 Cap Head Woodscrews which should do the job nicely. Note the AF size of the Allen key required - make sure you have (or get) one that will fit them... Quote Link to comment Share on other sites More sharing options...
Kevin Wilson Posted October 1, 2020 Share Posted October 1, 2020 Having used those cap head wood screws for motor mounting I can definitely recommend them. I was working on my wot-4 foam-e undercarriage last night. The No4 x 19mm screws are 6mm shorter than OEM but should do the job. Quote Link to comment Share on other sites More sharing options...
Jonathan S Posted October 1, 2020 Author Share Posted October 1, 2020 John, Mike, Kevin Thanks for the help. Ordered the screws I think I have the right hex key already but need to check. Will post pic when she is ready to go again. Jon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.