David Ovenden Posted November 5, 2020 Share Posted November 5, 2020 I need a lot of 1/8 x 3/8 balsa strip for stringers on the next model. I don't have that size in stock but I do have some hard 1/8" balsa sheet. I am tempted to use this to cut my own stripwood. What is the best balsa stripping tool you have used? I am tempted to make one; but if there is a good one easily available that might be easier. What is your experience of the various commercial cutters? Quote Link to comment Share on other sites More sharing options...
Martin Harris - Moderator Posted November 5, 2020 Share Posted November 5, 2020 Perhaps take a look here before we re-invent the wheel? Quote Link to comment Share on other sites More sharing options...
Ron Gray Posted November 5, 2020 Share Posted November 5, 2020 The 3D printed one that Pete posted the image of is really good, I made one for myself and was so impressed I made a couple more for buddies during Lockdown1. They have been equally impressed. Quote Link to comment Share on other sites More sharing options...
David Ovenden Posted November 5, 2020 Author Share Posted November 5, 2020 Martin Thanks for the link. You are right, all the info is in the other thread so no need to go over it all again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.