Andy J Posted September 3, 2022 Share Posted September 3, 2022 Within Opentx is it possible to change the output of a selected chanel to move beyond 100%? Need a slightly increased movement on a throttle channel but don't wish to change the mechanics of the linkage. Quote Link to comment Share on other sites More sharing options...
Ron Gray Posted September 3, 2022 Share Posted September 3, 2022 First screen of model setup, the one with the Model name etc, about halfway down. Quote Link to comment Share on other sites More sharing options...
MattyB Posted September 3, 2022 Share Posted September 3, 2022 1 hour ago, Andy Joyce said: Within Opentx is it possible to change the output of a selected chanel to move beyond 100%? Need a slightly increased movement on a throttle channel but don't wish to change the mechanics of the linkage. Before using extended limits I would recommend you read this to make sure you understand how OpenTX handles them… http://open-txu.org/home/undergraduate-courses/basic-airplane-set-up-with-taranis-2/important-info-on-servo-travel/ Quote Link to comment Share on other sites More sharing options...
Andy J Posted September 3, 2022 Author Share Posted September 3, 2022 Thanks all, issue now sorted. Quote Link to comment Share on other sites More sharing options...
.thumb.JPG.051c5bb1d446ab8af8a2c911cbae321b.JPG)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.