Andy Green Posted August 7, 2009 Share Posted August 7, 2009 Hi Would anyone know if JR Rx are OK at 6v. I seem to remember that they are not. In particular the NER-549X, couldn't find much on Google, except one site that said they would be OK. Guess this is 'ask the audience' time to get a consensus. Andy Quote Link to comment Share on other sites More sharing options...
John Privett Posted August 7, 2009 Share Posted August 7, 2009 I believe it's more of an issue with servos than receivers - certain servos shouldn't be run on 6v. Hopefully somebody can confirm this! Quote Link to comment Share on other sites More sharing options...
Doug Ireland Posted August 7, 2009 Share Posted August 7, 2009 Not sure about 35Meg systems but 2.4G are good for 3.5 to 9.6v but as John said, some servos don't like it. Quote Link to comment Share on other sites More sharing options...
nasa_steve Posted August 7, 2009 Share Posted August 7, 2009 i don't think its as much as the servo's don't like it McGregor will not warranty any of the digital servo's if found to have been run on 6v. if you speak to JR japan or usa they all say most of the servo's will run on 6v unless specifically stated not to.nasa Quote Link to comment Share on other sites More sharing options...
Andy Green Posted August 7, 2009 Author Share Posted August 7, 2009 Its a JR x and 6 Hitec 82's which are goo for 6v. Worth a try I think. I just hope the blue smoke stays in. Andy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.