Nick Holmes 2 Posted September 18, 2009 Share Posted September 18, 2009 Hi, my Futaba Transmitter, 6EX 2.4, LED on the rear is flshing red and green and the LCD display is not working. Can anyone help with what is wrong please? Many Thanks Nick Quote Link to comment Share on other sites More sharing options...
John Tee Posted September 21, 2009 Share Posted September 21, 2009 Hi Nick. my manual states that the LED will be solid green when the RF signal is being sent. Have you tried rebinding the Rx to the Tx. not sure if this will help as mine was connected by the factory and I have only had to bind extra Rx's. see page 9 of the manual if you have it to hand. Hope this may help. john Quote Link to comment Share on other sites More sharing options...
David McMullan Posted October 3, 2009 Share Posted October 3, 2009 Hi Nick, Problem sounds like an Unrecoverable failure (EEPROM, etc.) You'll have to contact Ripmax David Quote Link to comment Share on other sites More sharing options...
BB Posted October 3, 2009 Share Posted October 3, 2009 Davids right, its an error messege. You need to get it looked at. BB Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.