Jump to content

J V R

Members
  • Posts

    430
  • Joined

  • Last visited

Everything posted by J V R

  1. PB Thats spread over around 6/7 years of winter shed time I like to work in tee shirts and shorts...
  2. PeterF Yes you are right, my eberspacher I picked up was very cheep and it has worked well for quite a few years but is beginning to show a few faults but it has run in excess of 1400 hours so far... Time to have a back up plan so will look into getting one, just incase Edited By J V R on 29/11/2018 22:17:28
  3. I've used Eberspacher heaters for quite a few years, now these cheep clones have come onto the market I will get one to keep as a backup heater just in case my heater packs up as they cost around the same price to have my heater serviced by a Eberspacher engerneer.
  4. DD I've had this kit under my bench for 10 years, this thread might just kick start me into building mine
  5. Hi DM Your post has just reminded me how I used to bend steel pipes with a hydraulic bender and we had to give it 1.5 extra pumps on the ram to overcome the spring in the pipes, the biggest I bent was 2'' but the benders we used went up to 4'' if I remember correctly.
  6. Cotton rich baby socks work really well, thats what I use.
  7. J V R

    X9D Life settings

    I've just bought a Turnigy nano-tech 1500mAh LiFe 3S 9.9V Transmitter Pack for the X9D Tarans in the radio set up page what do I set the battery calibration value to and what value for the battery meter range.
  8. How about this stich counter but I would like to say its not mine
  9. J V R

  10. Hi Daniel, That's why I've used chrome vinyl on the fins to help with the orientation as I have the same covering on the top and bottom and I'm hoping the sun will reflect enough for me to work out which way up it is. I will maiden the blitz next weekend......
  11. J V R

  12. J V R

  13. J V R

  14. J V R

  15. J V R

  16. J V R

  17. I'll be watching this one Peter...... I do like the unusual
  18. Rocker you may have a faulty cell that is causing the over charge, I had a similar problem on a 24 volt Land rover due to a bad cell the total charge went up to around 30 volts
  19. J V R

  20. J V R

  21. J V R

×
×
  • Create New...