Chris Barlow
Members-
Posts
3,221 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Blogs
Gallery
Calendar
Downloads
Everything posted by Chris Barlow
-
Ashbourne Scale Day 2024
Chris Barlow replied to Chris poyser's topic in Shows, Club Events and Competitions
Hi Chris Would be happy with the 6th/13th Oct as 29th is Best of British at Buckminster and 20th is the last PSSA meeting at the Great Orme. Other than that I'll be there! 👍 -
Will be up for a scale day again whilst we still can Chris. 👍
-
Ashbourne Scale Day 2021
Chris Barlow replied to ceejay's topic in Shows, Club Events and Competitions
+1 please Chris. Sad this will be the last one. -
Thanks all for the comments. Pete, the way I see it we all push each other to be better in different ways, I'm just trying to keep up! Your confidence in throwing a new model off the cliff, Phils impossibly neat building, Alans encyclopedic memory, Andys production rate of new models not forgetting everybody's skill and ingenuity in creating the masterpieces seen on the slopes. Add to that brilliant flying, breathtaking flying sites and the fun and laughs on & off the slopes makes the PSSA an amazing group of people I'm grateful to be involved with! Anyway, my Sabre may be spread out across the hillside next weekend! ?
-
One more Phil! Practically finished aside from any final tweaks and touch ups! (Hanger rash already! ) Ailerons, flaps, elevator, rudder & 2 pylon release servos. AUW 2280g , pretty much 5lb, but feels OK. Needed 134g in the nose to balance & the tanks don't seem to affect the CoG when released. Finished in glass cloth, primer & 2K paints. Decals sprayed or water slide transfers. Pilot & seat 3d printed. Modeled on XB812 Canadair F4 Sabre used by 112(F) Sqn RAF in early 1950's at RAF Bruggen, Germany & now residing at RAF Cosford Museum hanging gracefully inverted from the hanger ceiling, albeit in a later squadrons makings.
-
A little late but many thanks for an excellent weekend! I love flying here due to the interesting obstacles and the tree line! For example... Approach the strip low left to right, just clearing the hedge, banking right all the way to the end of the strip showing the top side of the model, pull up sharpish to get over the large trees. Turn 270 deg left to approach the strip again towards yourself, coming in low over the wind sock in the middle or even through the gap between the two smaller trees in front!. Bank hard right & a gentle climb to fly around the two big trees on the left. continue the turn to approach yourself across the strip again, descending over the windsock to turn left & level out to fly to the end of the strip to the right again. Pull up hard to a vertical climb rolling into a split S and into a low right to left pass down the strip and then........ It's so easy to flow from one maneuver to the next. Great fun to fly with friends tail chasing. Overall another fun weekend camping, flying, talking. Chinese takeaway was spot on as always, delivered direct to the field! Thanks again DVMFC. ?
-
Canadair F4 Sabre XB812
Chris Barlow replied to Chris Barlow's topic in PSSA Mass Build 2020 - North American F-86 Sabre
A similar masking principle was used for the sharks mouth on the underside of the nose. The outside area was masked with tape and then the mouth was drawn onto the masking and cut with a sharp scalpel. This was sealed with clear coat and, when dry, sprayed white with a mist coat first followed by a heavier gloss coat. When dry I covered the entire mouth with vinyl masking and drew the gums and teeth. When happy with the layout I carefully cut through only the masking and removed everything that wasn't going to be white. The unmasked area was the airbushed with clearcoat (again!) and then red. Vinyl masking was also used for the ID letter and fin flashes. The gun ports were painted from a built up mask drawn and cut on the Portrait cutter. This was to ensure accurate spacing and positioning. The masks were applied to the nose and again the surrounding area masked off. A sealing coat of clear coat then black shading half on the mask and half on the Sabre, heavier across the rear and top edge of the port graduated to lighter, almost non existent towards the bottom and front. I still have to colour in the eye! Next is panel lines, shading, jet intake and serial numbers. -
Canadair F4 Sabre XB812
Chris Barlow replied to Chris Barlow's topic in PSSA Mass Build 2020 - North American F-86 Sabre
I should also add, keep the paint products separate! Twice I thinned the coloured base with clear coat not thinners and I nearly wiped the prepared area down with thinners instead of degreaser! ? -
Canadair F4 Sabre XB812
Chris Barlow replied to Chris Barlow's topic in PSSA Mass Build 2020 - North American F-86 Sabre
Strange coincidence? It is in fact modeled on the one hanging from the ceiling at Cosford Museum except in a former life with 112Sqn, mid 1950's. Not quite at the panel lines stage but they'll be airbrushed on over tape. So far I've been working on the markings and roundels. The surface has been flattened down first with 1000grit then 1500grit which helps to get rid of the raised masking lines. I cut vinyl masks with my Silhouette Portrait and laid the outer mask in position, masking the surrounding area. I then airbrushed inside the mask with clear coat to seal the edges of the mask to prevent paint bleed. When dry I airbrushed a light "mist coat" of white to aid adhesion to the clear coat. This was then over covered with a heavier coat of white. you can see why I flattened down the camo lines so they don't show through the decals. When dry I applied the two outer circles of the mask. Masked off the joining lines of the circles and applied another coat of clear coat to seal the inner circle of the mask. Again, when dry I sprayed the inner circle with red, let it dry then removed the masking tape from the joint lines in the mask, taped over the fresh red and removed the outer "blue" paint mask. More clear coat to prevent bleed and a blast of blue. Finally, when really dry I removed all the masking, cutting the circles so that I can peel the masks off perpendicular to the paint edge so it doesn't pull the paint up! This is where you find out of it worked OK, or not! This was done for all the roundels and fin flashes at the same time to save time on paint mixing, layers and drying times. P.S Thanks Pete. After reading your instructions and a bit of head scratching I have managed to figure out how to insert the photos within the text! ?? -
Canadair F4 Sabre XB812
Chris Barlow replied to Chris Barlow's topic in PSSA Mass Build 2020 - North American F-86 Sabre
It's been a while since I've been in here! Managed to figure out the messed up login but still can't find my old photo albums, and I'm not sure how to add a new photo to this post! Still, onwards! Managed to get a bit more done on the Sabre. Cockpit has been fitted out & painted, canopy stuck over it & blended in to the fuselage, plenty of sanding & filling too! Finally got to the stage where it was ready for some shiny paint, along with the Meteor. I started by spraying the underside which was left to harder over 24 hours. This was then masked off & a coat of grey applied to the upper surfaces which was left for another 24 hours. The masking for the camouflage took nearly 2 hours, which was quite long considering the much larger Meteor only took 3 hours. Finally the green was sprayed over the grey. Next step will be to add those small details that take forever and some airbrushed insignia and markings. -
Canadair F4 Sabre XB812
Chris Barlow replied to Chris Barlow's topic in PSSA Mass Build 2020 - North American F-86 Sabre
Thanks Phil. I have used 2D cad programs for Architectural plans for work but that was Autocad R14 from the 1990's! Once I stopped trying to use Fusion 360 like Autocad I started to make some decent headway! Always up for learning new skills whilst I'm still young! Andy, Sorry! Busted! Edited By Chris Barlow on 16/03/2020 15:24:26 -
Sabre made in Belgium
Chris Barlow replied to dirk tinck's topic in PSSA Mass Build 2020 - North American F-86 Sabre
Excellent idea Dirk. I'm sure there'll be plenty of SAR volunteers to pick up the pilot! I did try to release a secret agent parachutist from my Vulcan bomb bay but even though he jumped from quite a distance from the slope face, due to the slope lift he cleared us at quite a good height and made his way off to invade the pier on the other side of the Orme! -
Phil's F-86 Sabre build thread
Chris Barlow replied to Phil Cooke's topic in PSSA Mass Build 2020 - North American F-86 Sabre
I remember the days when a pilot bust, shoulders up, was good enough for scale! What has happened to us! Your pilot as drawn on the plan reminds me of the old Dolly peg dolls! -
Canadair F4 Sabre XB812
Chris Barlow replied to Chris Barlow's topic in PSSA Mass Build 2020 - North American F-86 Sabre
Hmmm, I was going to start with "not much progress over the last few weeks" but looking at the last photos I realise there's quite a bit of work been done, just doesn't seem like it! All the parts have been sanded, glassed and sanded again. I spent quite a few hours attempting to design my own pilot seat in Fusion 360, which required not only studying photographs of the seat but also learning how to draw! I think I'm happy with the end result though and have also discovered that drawing is one thing but drawing so that the model can be 3D printed takes a little more thought! Pilot was a free model from Thingiverse. A slightly gentler learning curve has been a move from my usual paints to a 2 pack paint, something I've never used before. Although not much more expensive than cellulose paints this lot cost nearly £140, but th primer will do all the models I'll build this year and the 3 colours are enough for 2 of my current builds. What did surprise me though was the cost and availability of filters for my respirator. I usually treat myself to the filters through work but my usual sources were out of stock and worryingly the message on the Screwfix pages limited supply of respirators and filters to 5 per order! Further online searches finally revealed a supplier near London with 1 pair left in stock so that was ordered. There were others available on ebay but the usual price of around £30 had increased to £45 with one seller advertising the filters at a whopping £99! So with new filters fitted and between gaps in the rain the glassed parts were primed, sanded and primed again. A few extra parts there for a JP too! I also printed off a few painters pyramids to help in drying the parts. The wing has also been primed but I ran out of space to photograph it! -
C17 Globemaster III - 1/15th Scale for PSS
Chris Barlow replied to Andy Meade's topic in PSS Build Blogs
Posted by Andy Meade on 27/01/2020 14:51:14: Another assembled shot in the garden, getting the tension system between fore and aft fuselage parts sorted : Onwards! Photo says it all! Lets go! -
Canadair F4 Sabre XB812
Chris Barlow replied to Chris Barlow's topic in PSSA Mass Build 2020 - North American F-86 Sabre
Hi Rob. Yes the rudder actuation is a tough one if you want to keep the hinge lines and don't want external snakes or pulls. You could always "adjust" the hinge line 1/4" forward and/or offset the elevator bell crank to one side as I've seen on a couple of blogs. Depends who notices! Andy is already scouring the blogs looking for sinners and heathens! -
Canadair F4 Sabre XB812
Chris Barlow replied to Chris Barlow's topic in PSSA Mass Build 2020 - North American F-86 Sabre
Thanks Chris. I managed to stop myself from unwrapping it earlier by chopping down the neighbors conifer trees which have started to rub against the shed roof. He's in for such a surprise when he comes home! I also had a bit of an epiphany regarding mixing ratios. I usually use Zpoxy which is a 1:1 mix ratio but have now changed to Easy Composites laminating resin which is 100:30 resin to hardener. The voices in my head were arguing how to calculate the required amounts to mix 20g of resin when a quiet, rational voice from somewhere behind my forehead explained for 20g resin divide by the sum of the ratio, multiplied by the resin amount. The balance up to 20g is hardner! so, 20g mix / (100 resin + 30 hardener) = 0.1538 0.1538 *100 resin = 15.38g resin balance to 20g = 4.62g hardener To be certain I tracked down an epoxy resin calculator online and checked the amounts for a 100:30 ratio. I don't know why this has confused me before as it seems so simple now! Edited By Chris Barlow on 01/02/2020 19:36:22