Ernie Posted May 21, 2008 Share Posted May 21, 2008 Hi Guys, I'm on Futaba 2.4 now..Do I still have the problem of noise caused by metal to metal connections. I'm setting up a closed loop rudder, and would like the cable to exit the fuselage through a very short length of alloy tube (to stop it rubbing on the balsa)Thanks Ernie Quote Link to comment Share on other sites More sharing options...
David Ashby - Moderator Posted May 21, 2008 Share Posted May 21, 2008 I think you'll be fine Ernie. 2.4 has had bigger tests and come through. Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted May 21, 2008 Share Posted May 21, 2008 Seconded, any potential interference generated by that will be way below the operating frequency of 2.4Ghz. Quote Link to comment Share on other sites More sharing options...
Ernie Posted May 22, 2008 Author Share Posted May 22, 2008 Thanks guys, ernie Quote Link to comment Share on other sites More sharing options...
Andy Green Posted May 22, 2008 Share Posted May 22, 2008 Must you use ali tube - I use plastic snake (outter and inner)Andy Quote Link to comment Share on other sites More sharing options...
Tim Mackey Posted May 22, 2008 Share Posted May 22, 2008 Yes thats a point, why not use plastic guides Quote Link to comment Share on other sites More sharing options...
Former Member Posted May 22, 2008 Share Posted May 22, 2008 [This posting has been removed] Quote Link to comment Share on other sites More sharing options...
001 Posted May 23, 2008 Share Posted May 23, 2008 Or - use fishing trace, which is coated in Nylon and cheap!. Quote Link to comment Share on other sites More sharing options...
Engine Doctor Posted May 26, 2008 Share Posted May 26, 2008 Yep use the fishing trace ( as above ) and plastic tubes (snake leftovers) then thers no chaffing or wear. 2.4 shouldn't be affected by metal to metal noise but range check it anyway with the engine running. Good luck Quote Link to comment Share on other sites More sharing options...
Ernie Posted May 27, 2008 Author Share Posted May 27, 2008 Thanks Guys, I'm listening. and learning.ernie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.