Steve Woodward Posted August 4, 2019 Share Posted August 4, 2019 My 9CAP has suddenly lost servo movement and sensitivity on channel 1. I'm only getting about half of the servo movement I get on other channels, and no movement until stick nearly half way to max.I have checked all settings for rates, expo etc, and the servo graphic on the TX confirms the issue on all model memories. Any ideas? Quote Link to comment Share on other sites More sharing options...
Frank Skilbeck Posted August 4, 2019 Share Posted August 4, 2019 Probably a faulty tx pot on that stick (aileron?), I know the guys in our club who used to have old 9 CAPs changed out the pots periodically. Quote Link to comment Share on other sites More sharing options...
Craig Carr Posted August 4, 2019 Share Posted August 4, 2019 Steve, probably the pots as Frank suggests why not ask Mike Ridley (click here ) I’ve used him recently to repair my FF9... top bloke and great service (fast turnaround) craig Edited By Craig Carr on 04/08/2019 18:47:40 Quote Link to comment Share on other sites More sharing options...
Steve Woodward Posted August 5, 2019 Author Share Posted August 5, 2019 Thanks for that. Need to get it serviced then. Quote Link to comment Share on other sites More sharing options...
cymaz Posted August 5, 2019 Share Posted August 5, 2019 Does it happen on all models? If so it’s the Tx, I’ll wager Quote Link to comment Share on other sites More sharing options...
Steve Woodward Posted August 6, 2019 Author Share Posted August 6, 2019 Yes, all models. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.