Skippers Walker Posted January 27, 2020 Share Posted January 27, 2020 Hello Modellers I recently purchased a Futaba T6K (V2) TX from Hobbyking. I note that the charging socket requires a jack plug of 3.5mm outside diameter rather than the larger plug/sockets fitted to other Futaba TX's! Despite an exhaustive search on the net, including an email to Ripmax (no response yet) I have yet to find either a suitable wall charger or an adapter lead of the correct size! Has any other T6K owner encountered this problem please or can suggest the right charger model to buy? Chris Quote Link to comment Share on other sites More sharing options...
Denis Watkins Posted January 27, 2020 Share Posted January 27, 2020 On eBay Chris Just search your required size mm to mm Male female etc etc Quote Link to comment Share on other sites More sharing options...
PatMc Posted January 27, 2020 Share Posted January 27, 2020 Any good ? Quote Link to comment Share on other sites More sharing options...
CARPERFECT Posted January 27, 2020 Share Posted January 27, 2020 Ripmax Charger for the T 6 , 8, 10 Transmitters it has two outputs both 4.8 to 6v £13.99 part No P-FBC32D/4 These chargers are available everywhere Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.